Unable to create channel of type 'DAHDI' Everyone is busy/congested at this time 2

[leonardo07746]

Hola y buenos dias, ya habido otro thread que data de enero del 203 en donde se habla del mismo error pero quisiera enfatizar en la posible solución sugerida por Cristian Cabrera, se hace referencia a los canaleso que los grupos no esten declarados en los archivos chan_dahdi y dahdi-channels.conf, en mi caso tengo una tarjeta Digium AEX800, y asterisk 11.2 sobre Centos, yo configure 3 grupos cada uno con un trunk diferente, una extension mas 2 lineas directas, cuando reviso en mis archivos estan los mismos parametros por default del sistema, no los que cambie via GUI, aqui les expongo dahdi-channels.conf:

; Autogenerated by /usr/sbin/dahdi_genconf on Fri Jul 31 06:34:58 2015
; If you edit this file and execute /usr/sbin/dahdi_genconf again,
; your manual changes will be LOST.
; Dahdi Channels Configurations (chan_dahdi.conf)
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
;

; Span 1: WCTDM/0 "Wildcard AEX800" (MASTER)
;;; line="1 WCTDM/0/0 FXOKS (EC: VPMOCT032 - INACTIVE)"
signalling=fxo_ks
callerid="Channel 1" <4001>
mailbox=4001
group=5
context=from-internal
channel => 1
callerid=
mailbox=
group=
context=default

;;; line="2 WCTDM/0/1 FXOKS (EC: VPMOCT032 - INACTIVE)"
signalling=fxo_ks
callerid="Channel 2" <4002>
mailbox=4002
group=5
context=from-internal
channel => 2
callerid=
mailbox=
group=
context=default

;;; line="3 WCTDM/0/2 FXOKS (EC: VPMOCT032 - INACTIVE)"
signalling=fxo_ks
callerid="Channel 3" <4003>
mailbox=4003
group=5
context=from-internal
channel => 3
callerid=
mailbox=
group=
context=default

;;; line="4 WCTDM/0/3 FXOKS (EC: VPMOCT032 - INACTIVE)"
signalling=fxo_ks
callerid="Channel 4" <4004>
mailbox=4004
group=5
context=from-internal
channel => 4
callerid=
mailbox=
group=
context=default

;;; line="5 WCTDM/0/4 FXSKS (EC: VPMOCT032 - INACTIVE)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 5
callerid=
group=
context=default

;;; line="6 WCTDM/0/5 FXSKS (EC: VPMOCT032 - INACTIVE)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 6
callerid=
group=
context=default

;;; line="7 WCTDM/0/6 FXSKS (EC: VPMOCT032 - INACTIVE)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 7
callerid=
group=
context=default

;;; line="8 WCTDM/0/7 FXSKS (EC: VPMOCT032 - INACTIVE)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 8
callerid=
group=
context=default

[hector]

Que estas buscando obtener? Tienes algun error?