Tweet
Hola a todos y gracias por leer mi consulta
Estoy luchando con la configuración de una placa sangoma a101, tratando de configurar una trama e1, hdb3, mfcr2
La verdad que estoy aplicando la misma configuración que ya me ha funcionado varias veces, pero no estoy teniendo resultado
Yo veo la trama con alarmas, el TX IDLE y todos los RX BLOCK
Desde el carrier me dicen que está todo bien, fueron a medir, y segun ellos todo esta bien...
Alguien con experiencia en estos temas me podria decir si ve algo para mejorar?
Paso la configuración, un par de comandos y una captura de log
---------------------------------|system.conf|---------------------------------
# Span 1: WPE1/0 "wanpipe1 card 0" (MASTER) HDB3
span=1,1,0,cas,hdb3
# termtype: te
cas=1-15:1101
dchan=16
cas=17-31:1101
echocanceller=mg2,1-15,17-31
# Global data
loadzone = ar
defaultzone = ar
---------------------------------|dahdi-channels.conf|---------------------------------
; Span 1: WPE1/0 "wanpipe1 card 0" (MASTER) HDB3
group=0,11
context=from-pstn
switchtype = euroisdn
signalling = mfcr2
channel => 1-15,17-31
context = default
group = 63
---------------------------------|chan_dahdi_groups.conf|---------------------------------
; [span_1]
signalling=pri_cpe
switchtype=national
pridialplan=national
prilocaldialplan=national
group=0
context=from-digital
channel=>1-15,17-31
---------------------------------|chan_dahdi_channels_custom.conf|---------------------------------
immediate = no
relaxdtmf = no
sendcalleridafter = 1
mfcr2_variant=AR
mfcr2_get_ani_first=yes
mfcr2_max_ani=10
mfcr2_max_dnis=4
mfcr2_category=national_subscriber
mfcr2_mfback_timeout=-1
mfcr2_forced_release=no
mfcr2_allow_collect_calls=no
mfcr2_double_answer=no
mfcr2_immediate_accept=no
mfcr2_charge_calls=yes
mfcr2_call_files=no
signalling=mfcr2
channel => 1-15,17-31
---------------------------------|wanpipe1.conf|---------------------------------
[devices]
wanpipe1 = WAN_AFT_TE1, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 0
PCIBUS = 3
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_SIG_MODE = CCS
TE_HIGHIMPEDANCE = NO
TE_RX_SLEVEL = 430
HW_RJ45_PORT_MAP = DEFAULT
LBO = 120OH
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 16
TE_AIS_MAINTENANCE = NO #NO: defualt YES: Start port in AIS Blue Alarm and keep line down
#wanpipemon -i w1g1 -c Ttx_ais_off to disable AIS maintenance mode
#wanpipemon -i w1g1 -c Ttx_ais_on to enable AIS maintenance mode
TDMV_HW_DTMF = NO # YES: receive dtmf events from hardware
TDMV_HW_FAX_DETECT = NO # YES: receive fax 1100hz events from hardware
HWEC_OPERATION_MODE = OCT_NORMAL # OCT_NORMAL: echo cancelation enabled with nlp (default)
# OCT_SPEECH: improves software tone detection by disabling NLP (echo possible)
# OCT_NO_ECHO:disables echo cancelation but allows VQE/tone functions.
HWEC_DTMF_REMOVAL = NO # NO: default YES: remove dtmf out of incoming media (must have hwdtmf enabled)
HWEC_NOISE_REDUCTION = NO # NO: default YES: reduces noise on the line - could break fax
HWEC_ACUSTIC_ECHO = NO # NO: default YES: enables acustic echo cancelation
HWEC_NLP_DISABLE = NO # NO: default YES: guarantees software tone detection (possible echo)
HWEC_TX_AUTO_GAIN = 0 # 0: disable -40-0: default tx audio level to be maintained (-20 default)
HWEC_RX_AUTO_GAIN = 0 # 0: disable -40-0: default tx audio level to be maintained (-20 default)
HWEC_TX_GAIN = 0 # 0: disable -24-24: db values to be applied to tx signal
HWEC_RX_GAIN = 0 # 0: disable -24-24: db values to be applied to tx signal
[w1g1]
ACTIVE_CH = ALL
TDMV_HWEC = NO
MTU = 8
Estoy luchando con la configuración de una placa sangoma a101, tratando de configurar una trama e1, hdb3, mfcr2
La verdad que estoy aplicando la misma configuración que ya me ha funcionado varias veces, pero no estoy teniendo resultado
Yo veo la trama con alarmas, el TX IDLE y todos los RX BLOCK
Desde el carrier me dicen que está todo bien, fueron a medir, y segun ellos todo esta bien...
Alguien con experiencia en estos temas me podria decir si ve algo para mejorar?
Paso la configuración, un par de comandos y una captura de log
---------------------------------|system.conf|---------------------------------
# Span 1: WPE1/0 "wanpipe1 card 0" (MASTER) HDB3
span=1,1,0,cas,hdb3
# termtype: te
cas=1-15:1101
dchan=16
cas=17-31:1101
echocanceller=mg2,1-15,17-31
# Global data
loadzone = ar
defaultzone = ar
---------------------------------|dahdi-channels.conf|---------------------------------
; Span 1: WPE1/0 "wanpipe1 card 0" (MASTER) HDB3
group=0,11
context=from-pstn
switchtype = euroisdn
signalling = mfcr2
channel => 1-15,17-31
context = default
group = 63
---------------------------------|chan_dahdi_groups.conf|---------------------------------
; [span_1]
signalling=pri_cpe
switchtype=national
pridialplan=national
prilocaldialplan=national
group=0
context=from-digital
channel=>1-15,17-31
---------------------------------|chan_dahdi_channels_custom.conf|---------------------------------
immediate = no
relaxdtmf = no
sendcalleridafter = 1
mfcr2_variant=AR
mfcr2_get_ani_first=yes
mfcr2_max_ani=10
mfcr2_max_dnis=4
mfcr2_category=national_subscriber
mfcr2_mfback_timeout=-1
mfcr2_forced_release=no
mfcr2_allow_collect_calls=no
mfcr2_double_answer=no
mfcr2_immediate_accept=no
mfcr2_charge_calls=yes
mfcr2_call_files=no
signalling=mfcr2
channel => 1-15,17-31
---------------------------------|wanpipe1.conf|---------------------------------
[devices]
wanpipe1 = WAN_AFT_TE1, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 0
PCIBUS = 3
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_SIG_MODE = CCS
TE_HIGHIMPEDANCE = NO
TE_RX_SLEVEL = 430
HW_RJ45_PORT_MAP = DEFAULT
LBO = 120OH
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 16
TE_AIS_MAINTENANCE = NO #NO: defualt YES: Start port in AIS Blue Alarm and keep line down
#wanpipemon -i w1g1 -c Ttx_ais_off to disable AIS maintenance mode
#wanpipemon -i w1g1 -c Ttx_ais_on to enable AIS maintenance mode
TDMV_HW_DTMF = NO # YES: receive dtmf events from hardware
TDMV_HW_FAX_DETECT = NO # YES: receive fax 1100hz events from hardware
HWEC_OPERATION_MODE = OCT_NORMAL # OCT_NORMAL: echo cancelation enabled with nlp (default)
# OCT_SPEECH: improves software tone detection by disabling NLP (echo possible)
# OCT_NO_ECHO:disables echo cancelation but allows VQE/tone functions.
HWEC_DTMF_REMOVAL = NO # NO: default YES: remove dtmf out of incoming media (must have hwdtmf enabled)
HWEC_NOISE_REDUCTION = NO # NO: default YES: reduces noise on the line - could break fax
HWEC_ACUSTIC_ECHO = NO # NO: default YES: enables acustic echo cancelation
HWEC_NLP_DISABLE = NO # NO: default YES: guarantees software tone detection (possible echo)
HWEC_TX_AUTO_GAIN = 0 # 0: disable -40-0: default tx audio level to be maintained (-20 default)
HWEC_RX_AUTO_GAIN = 0 # 0: disable -40-0: default tx audio level to be maintained (-20 default)
HWEC_TX_GAIN = 0 # 0: disable -24-24: db values to be applied to tx signal
HWEC_RX_GAIN = 0 # 0: disable -24-24: db values to be applied to tx signal
[w1g1]
ACTIVE_CH = ALL
TDMV_HWEC = NO
MTU = 8
Comentario