Tel Polycom se registra pero no se comunica

**navaismo** · 06-05-2012, 07:20 AM

Re: Tel Polycom se registra pero no se comunica

Usualmente servicio no disponible indica que no existe ese numero marcado. Para poder ayudarte mejor por favor copia y pega la salida del cli de asterisk cuando hagas la llamada y del comando sip show peers.

**lsnadal** · 06-05-2012, 08:36 AM

Re: Tel Polycom se registra pero no se comunica

ESTOS DOS INTERNOS SON LOS QUE INGRESAN AL ASTERISK EN MI CASA Y SALEN POR LA RED PUBLICA DE MI TRABAJO.
EL FIREWALL DE MI TRABAJO ESTA ABIERTO PARA LOS PUERTOS NECESARIOS PARA EL NORMAL FUNCIONAMIENTO ESTO ESTA VERIFICADO.

Name/Username: 1050/1050
host: XXX.XXXX.XXXX.XXXX dirección publica correcta
dyn: D
Forcerport: N
ACL: A
Port: 5060
Satatus: OK (52 ms)

Name/Username: 1051/1051
host: XXX.XXXX.XXXX.XXXX dirección publica correcta
dyn: D
Forcerport: N
ACL: A
Port: 5061
Satatus: OK (40 ms)

5 sip peers [Monitored: 4 online, 1 offline Unmonitored: 0 online, 0 offline]

Efectivamente tengo 5 extensiones sip y una no esta registrada por que la pc dentro de la lan esta apagada.

esta es la salida de consola cuando llamo desde el 1051 al 1050
Connected to Asterisk 1.8.11.0 currently running on pbx (pid = 2766)
Verbosity is at least 3
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Executing [1050@from-internal:1] Macro("SIP/1051-0000002c", "exten-vm,novm,1050") in new stack
-- Executing [s@macro-exten-vm:1] Macro("SIP/1051-0000002c", "user-callerid,") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/1051-0000002c", "AMPUSER=1051") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/1051-0000002c", "0?report") in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("SIP/1051-0000002c", "1?Set(REALCALLERIDNUM=1051)") in new stack
-- Executing [s@macro-user-callerid:4] Set("SIP/1051-0000002c", "AMPUSER=1051") in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/1051-0000002c", "AMPUSERCIDNAME=pc-oficina2") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("SIP/1051-0000002c", "0?report") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/1051-0000002c", "AMPUSERCID=1051") in new stack
-- Executing [s@macro-user-callerid:8] Set("SIP/1051-0000002c", "CALLERID(all)="pc-oficina2" <1051>") in new stack
-- Executing [s@macro-user-callerid:9] ExecIf("SIP/1051-0000002c", "0?Set(CHANNEL(language)=)") in new stack
-- Executing [s@macro-user-callerid:10] GotoIf("SIP/1051-0000002c", "0?continue") in new stack
-- Executing [s@macro-user-callerid:11] Set("SIP/1051-0000002c", "__TTL=64") in new stack
-- Executing [s@macro-user-callerid:12] GotoIf("SIP/1051-0000002c", "1?continue") in new stack
-- Goto (macro-user-callerid,s,19)
-- Executing [s@macro-user-callerid:19] Set("SIP/1051-0000002c", "CALLERID(number)=1051") in new stack
-- Executing [s@macro-user-callerid:20] Set("SIP/1051-0000002c", "CALLERID(name)=pc-oficina2") in new stack
-- Executing [s@macro-user-callerid:21] NoOp("SIP/1051-0000002c", "Using CallerID "pc-oficina2" <1051>") in new stack
-- Executing [s@macro-exten-vm:2] Set("SIP/1051-0000002c", "RingGroupMethod=none") in new stack
-- Executing [s@macro-exten-vm:3] Set("SIP/1051-0000002c", "VMBOX=novm") in new stack
-- Executing [s@macro-exten-vm:4] Set("SIP/1051-0000002c", "__EXTTOCALL=1050") in new stack
-- Executing [s@macro-exten-vm:5] Set("SIP/1051-0000002c", "CFUEXT=") in new stack
-- Executing [s@macro-exten-vm:6] Set("SIP/1051-0000002c", "CFBEXT=") in new stack
-- Executing [s@macro-exten-vm:7] Set("SIP/1051-0000002c", "RT=""") in new stack
-- Executing [s@macro-exten-vm:8] Macro("SIP/1051-0000002c", "record-enable,1050,IN") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("SIP/1051-0000002c", "1?check") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] ExecIf("SIP/1051-0000002c", "0?MacroExit()") in new stack
-- Executing [s@macro-record-enable:5] GotoIf("SIP/1051-0000002c", "0?Group:OUT") in new stack
-- Goto (macro-record-enable,s,15)
-- Executing [s@macro-record-enable:15] GotoIf("SIP/1051-0000002c", "1?IN") in new stack
-- Goto (macro-record-enable,s,20)
-- Executing [s@macro-record-enable:20] ExecIf("SIP/1051-0000002c", "1?MacroExit()") in new stack
-- Executing [s@macro-exten-vm:9] Macro("SIP/1051-0000002c", "dial-one,"",tr,1050") in new stack
-- Executing [s@macro-dial-one:1] Set("SIP/1051-0000002c", "DEXTEN=1050") in new stack
-- Executing [s@macro-dial-one:2] Set("SIP/1051-0000002c", "DIALSTATUS_CW=") in new stack
-- Executing [s@macro-dial-one:3] GosubIf("SIP/1051-0000002c", "0?screen,1") in new stack
-- Executing [s@macro-dial-one:4] GosubIf("SIP/1051-0000002c", "0?cf,1") in new stack
-- Executing [s@macro-dial-one:5] GotoIf("SIP/1051-0000002c", "1?skip1") in new stack
-- Goto (macro-dial-one,s,8)
-- Executing [s@macro-dial-one:8] GotoIf("SIP/1051-0000002c", "0?nodial") in new stack
-- Executing [s@macro-dial-one:9] GotoIf("SIP/1051-0000002c", "0?continue") in new stack
-- Executing [s@macro-dial-one:10] Set("SIP/1051-0000002c", "EXTHASCW=") in new stack
-- Executing [s@macro-dial-one:11] GotoIf("SIP/1051-0000002c", "1?next1:cwinusebusy") in new stack
-- Goto (macro-dial-one,s,12)
-- Executing [s@macro-dial-one:12] GotoIf("SIP/1051-0000002c", "0?docfu:skip3") in new stack
-- Goto (macro-dial-one,s,16)
-- Executing [s@macro-dial-one:16] GotoIf("SIP/1051-0000002c", "1?next2:continue") in new stack
-- Goto (macro-dial-one,s,17)
-- Executing [s@macro-dial-one:17] GotoIf("SIP/1051-0000002c", "1?continue") in new stack
-- Goto (macro-dial-one,s,25)
-- Executing [s@macro-dial-one:25] GotoIf("SIP/1051-0000002c", "0?nodial") in new stack
-- Executing [s@macro-dial-one:26] GosubIf("SIP/1051-0000002c", "1?dstring,1:dlocal,1") in new stack
-- Executing [dstring@macro-dial-one:1] Set("SIP/1051-0000002c", "DSTRING=") in new stack
-- Executing [dstring@macro-dial-one:2] Set("SIP/1051-0000002c", "DEVICES=1050") in new stack
-- Executing [dstring@macro-dial-one:3] ExecIf("SIP/1051-0000002c", "0?Return()") in new stack
-- Executing [dstring@macro-dial-one:4] ExecIf("SIP/1051-0000002c", "0?Set(DEVICES=050)") in new stack
-- Executing [dstring@macro-dial-one:5] Set("SIP/1051-0000002c", "LOOPCNT=1") in new stack
-- Executing [dstring@macro-dial-one:6] Set("SIP/1051-0000002c", "ITER=1") in new stack
-- Executing [dstring@macro-dial-one:7] Set("SIP/1051-0000002c", "THISDIAL=SIP/1050") in new stack
-- Executing [dstring@macro-dial-one:8] GosubIf("SIP/1051-0000002c", "1?zap2dahdi,1") in new stack
-- Executing [zap2dahdi@macro-dial-one:1] ExecIf("SIP/1051-0000002c", "0?Return()") in new stack
-- Executing [zap2dahdi@macro-dial-one:2] Set("SIP/1051-0000002c", "NEWDIAL=") in new stack
-- Executing [zap2dahdi@macro-dial-one:3] Set("SIP/1051-0000002c", "LOOPCNT2=1") in new stack
-- Executing [zap2dahdi@macro-dial-one:4] Set("SIP/1051-0000002c", "ITER2=1") in new stack
-- Executing [zap2dahdi@macro-dial-one:5] Set("SIP/1051-0000002c", "THISPART2=SIP/1050") in new stack
-- Executing [zap2dahdi@macro-dial-one:6] ExecIf("SIP/1051-0000002c", "0?Set(THISPART2=DAHDI/1050)") in new stack
-- Executing [zap2dahdi@macro-dial-one:7] Set("SIP/1051-0000002c", "NEWDIAL=SIP/1050&") in new stack
-- Executing [zap2dahdi@macro-dial-one:8] Set("SIP/1051-0000002c", "ITER2=2") in new stack
-- Executing [zap2dahdi@macro-dial-one:9] GotoIf("SIP/1051-0000002c", "0?begin2") in new stack
-- Executing [zap2dahdi@macro-dial-one:10] Set("SIP/1051-0000002c", "THISDIAL=SIP/1050") in new stack
-- Executing [zap2dahdi@macro-dial-one:11] Return("SIP/1051-0000002c", "") in new stack
-- Executing [dstring@macro-dial-one:9] Set("SIP/1051-0000002c", "DSTRING=SIP/1050&") in new stack
-- Executing [dstring@macro-dial-one:10] Set("SIP/1051-0000002c", "ITER=2") in new stack
-- Executing [dstring@macro-dial-one:11] GotoIf("SIP/1051-0000002c", "0?begin") in new stack
-- Executing [dstring@macro-dial-one:12] Set("SIP/1051-0000002c", "DSTRING=SIP/1050") in new stack
-- Executing [dstring@macro-dial-one:13] Return("SIP/1051-0000002c", "") in new stack
-- Executing [s@macro-dial-one:27] GotoIf("SIP/1051-0000002c", "0?nodial") in new stack
-- Executing [s@macro-dial-one:28] GotoIf("SIP/1051-0000002c", "1?skiptrace") in new stack
-- Goto (macro-dial-one,s,30)
-- Executing [s@macro-dial-one:30] Set("SIP/1051-0000002c", "D_OPTIONS=tr") in new stack
-- Executing [s@macro-dial-one:31] ExecIf("SIP/1051-0000002c", "0?SIPAddHeader(Alert-Info: )") in new stack
-- Executing [s@macro-dial-one:32] ExecIf("SIP/1051-0000002c", "0?SIPAddHeader()") in new stack
-- Executing [s@macro-dial-one:33] ExecIf("SIP/1051-0000002c", "0?Set(CHANNEL(musicclass)=)") in new stack
-- Executing [s@macro-dial-one:34] GosubIf("SIP/1051-0000002c", "0?qwait,1") in new stack
-- Executing [s@macro-dial-one:35] Set("SIP/1051-0000002c", "__CWIGNORE=") in new stack
-- Executing [s@macro-dial-one:36] Set("SIP/1051-0000002c", "__KEEPCID=TRUE") in new stack
-- Executing [s@macro-dial-one:37] Dial("SIP/1051-0000002c", "SIP/1050,"",tr") in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Called SIP/1050
== Everyone is busy/congested at this time (1:0/1/0)
-- Executing [s@macro-dial-one:38] ExecIf("SIP/1051-0000002c", "0?Set(DIALSTATUS=)") in new stack
-- Executing [s@macro-dial-one:39] GosubIf("SIP/1051-0000002c", "0?s-CONGESTION,1") in new stack
-- Executing [s@macro-dial-one:40] MacroExit("SIP/1051-0000002c", "") in new stack
-- Executing [s@macro-exten-vm:10] GotoIf("SIP/1051-0000002c", "0?exit") in new stack
-- Executing [s@macro-exten-vm:11] Set("SIP/1051-0000002c", "SV_DIALSTATUS=CONGESTION") in new stack
-- Executing [s@macro-exten-vm:12] GosubIf("SIP/1051-0000002c", "0?docfu,1") in new stack
-- Executing [s@macro-exten-vm:13] GosubIf("SIP/1051-0000002c", "0?docfb,1") in new stack
-- Executing [s@macro-exten-vm:14] Set("SIP/1051-0000002c", "DIALSTATUS=CONGESTION") in new stack
-- Executing [s@macro-exten-vm:15] NoOp("SIP/1051-0000002c", "Voicemail is 'novm'") in new stack
-- Executing [s@macro-exten-vm:16] GotoIf("SIP/1051-0000002c", "1?s-CONGESTION,1") in new stack
-- Goto (macro-exten-vm,s-CONGESTION,1)
-- Executing [s-CONGESTION@macro-exten-vm:1] NoOp("SIP/1051-0000002c", "IVR_RETVM: IVR_CONTEXT: ") in new stack
-- Executing [s-CONGESTION@macro-exten-vm:2] GotoIf("SIP/1051-0000002c", "0?exit,1") in new stack
-- Executing [s-CONGESTION@macro-exten-vm:3] PlayTones("SIP/1051-0000002c", "congestion") in new stack
-- Executing [s-CONGESTION@macro-exten-vm:4] Congestion("SIP/1051-0000002c", "10") in new stack
== Spawn extension (macro-exten-vm, s-CONGESTION, 4) exited non-zero on 'SIP/1051-0000002c' in macro 'exten-vm'
== Spawn extension (from-internal, 1050, 1) exited non-zero on 'SIP/1051-0000002c'
-- Executing [h@from-internal:1] Macro("SIP/1051-0000002c", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] GotoIf("SIP/1051-0000002c", "1?endmixmoncheck") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] NoOp("SIP/1051-0000002c", "End of MIXMON check") in new stack
-- Executing [s@macro-hangupcall:10] GotoIf("SIP/1051-0000002c", "1?nomeetmemon") in new stack
-- Goto (macro-hangupcall,s,15)
-- Executing [s@macro-hangupcall:15] NoOp("SIP/1051-0000002c", "MEETME_RECORDINGFILE=") in new stack
-- Executing [s@macro-hangupcall:16] GotoIf("SIP/1051-0000002c", "1?noautomon") in new stack
-- Goto (macro-hangupcall,s,18)
-- Executing [s@macro-hangupcall:18] NoOp("SIP/1051-0000002c", "TOUCH_MONITOR_OUTPUT=") in new stack
-- Executing [s@macro-hangupcall:19] GotoIf("SIP/1051-0000002c", "1?noautomon2") in new stack
-- Goto (macro-hangupcall,s,25)
-- Executing [s@macro-hangupcall:25] NoOp("SIP/1051-0000002c", "MONITOR_FILENAME=") in new stack
-- Executing [s@macro-hangupcall:26] GotoIf("SIP/1051-0000002c", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,29)
-- Executing [s@macro-hangupcall:29] GotoIf("SIP/1051-0000002c", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,32)
-- Executing [s@macro-hangupcall:32] GotoIf("SIP/1051-0000002c", "1?theend") in new stack
-- Goto (macro-hangupcall,s,34)
-- Executing [s@macro-hangupcall:34] Hangup("SIP/1051-0000002c", "") in new stack
== Spawn extension (macro-hangupcall, s, 34) exited non-zero on 'SIP/1051-0000002c' in macro 'hangupcall'
== Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/1051-0000002c'
-- Remote UNIX connection
-- Remote UNIX connection disconnected

ESTA ES LA SALIDA DE HABER DISCADO *65 DESDE EL SOFTPHONE 1051

Connected to Asterisk 1.8.11.0 currently running on pbx (pid = 2766)
Verbosity is at least 3
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Executing [*65@from-internal:1] Answer("SIP/1051-0000002e", "") in new stack
-- Executing [*65@from-internal:2] Wait("SIP/1051-0000002e", "1") in new stack
-- Executing [*65@from-internal:3] Macro("SIP/1051-0000002e", "user-callerid,") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/1051-0000002e", "AMPUSER=1051") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/1051-0000002e", "0?report") in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("SIP/1051-0000002e", "1?Set(REALCALLERIDNUM=1051)") in new stack
-- Executing [s@macro-user-callerid:4] Set("SIP/1051-0000002e", "AMPUSER=1051") in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/1051-0000002e", "AMPUSERCIDNAME=pc-oficina2") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("SIP/1051-0000002e", "0?report") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/1051-0000002e", "AMPUSERCID=1051") in new stack
-- Executing [s@macro-user-callerid:8] Set("SIP/1051-0000002e", "CALLERID(all)="pc-oficina2" <1051>") in new stack
-- Executing [s@macro-user-callerid:9] ExecIf("SIP/1051-0000002e", "0?Set(CHANNEL(language)=)") in new stack
-- Executing [s@macro-user-callerid:10] GotoIf("SIP/1051-0000002e", "0?continue") in new stack
-- Executing [s@macro-user-callerid:11] Set("SIP/1051-0000002e", "__TTL=64") in new stack
-- Executing [s@macro-user-callerid:12] GotoIf("SIP/1051-0000002e", "1?continue") in new stack
-- Goto (macro-user-callerid,s,19)
-- Executing [s@macro-user-callerid:19] Set("SIP/1051-0000002e", "CALLERID(number)=1051") in new stack
-- Executing [s@macro-user-callerid:20] Set("SIP/1051-0000002e", "CALLERID(name)=pc-oficina2") in new stack
-- Executing [s@macro-user-callerid:21] NoOp("SIP/1051-0000002e", "Using CallerID "pc-oficina2" <1051>") in new stack
-- Executing [*65@from-internal:4] Playback("SIP/1051-0000002e", "your") in new stack
-- <SIP/1051-0000002e> Playing 'your.gsm' (language 'en')
-- Executing [*65@from-internal:5] Playback("SIP/1051-0000002e", "extension") in new stack
-- <SIP/1051-0000002e> Playing 'extension.gsm' (language 'en')
-- Executing [*65@from-internal:6] Playback("SIP/1051-0000002e", "number") in new stack
-- <SIP/1051-0000002e> Playing 'number.gsm' (language 'en')
-- Executing [*65@from-internal:7] Playback("SIP/1051-0000002e", "is") in new stack
-- Executing [*65@from-internal:8] SayDigits("SIP/1051-0000002e", "1051") in new stack
-- <SIP/1051-0000002e> Playing 'digits/1.gsm' (language 'en')
-- <SIP/1051-0000002e> Playing 'digits/0.gsm' (language 'en')
-- <SIP/1051-0000002e> Playing 'digits/5.gsm' (language 'en')
-- <SIP/1051-0000002e> Playing 'digits/1.gsm' (language 'en')
-- Executing [*65@from-internal:9] Wait("SIP/1051-0000002e", "2") in new stack
-- Executing [*65@from-internal:10] Hangup("SIP/1051-0000002e", "") in new stack
== Spawn extension (from-internal, *65, 10) exited non-zero on 'SIP/1051-0000002e'
-- Executing [h@from-internal:1] Macro("SIP/1051-0000002e", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] GotoIf("SIP/1051-0000002e", "1?endmixmoncheck") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] NoOp("SIP/1051-0000002e", "End of MIXMON check") in new stack
-- Executing [s@macro-hangupcall:10] GotoIf("SIP/1051-0000002e", "1?nomeetmemon") in new stack
-- Goto (macro-hangupcall,s,15)
-- Executing [s@macro-hangupcall:15] NoOp("SIP/1051-0000002e", "MEETME_RECORDINGFILE=") in new stack
-- Executing [s@macro-hangupcall:16] GotoIf("SIP/1051-0000002e", "1?noautomon") in new stack
-- Goto (macro-hangupcall,s,18)
-- Executing [s@macro-hangupcall:18] NoOp("SIP/1051-0000002e", "TOUCH_MONITOR_OUTPUT=") in new stack
-- Executing [s@macro-hangupcall:19] GotoIf("SIP/1051-0000002e", "1?noautomon2") in new stack
-- Goto (macro-hangupcall,s,25)
-- Executing [s@macro-hangupcall:25] NoOp("SIP/1051-0000002e", "MONITOR_FILENAME=") in new stack
-- Executing [s@macro-hangupcall:26] GotoIf("SIP/1051-0000002e", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,29)
-- Executing [s@macro-hangupcall:29] GotoIf("SIP/1051-0000002e", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,32)
-- Executing [s@macro-hangupcall:32] GotoIf("SIP/1051-0000002e", "1?theend") in new stack
-- Goto (macro-hangupcall,s,34)
-- Executing [s@macro-hangupcall:34] Hangup("SIP/1051-0000002e", "") in new stack
== Spawn extension (macro-hangupcall, s, 34) exited non-zero on 'SIP/1051-0000002e' in macro 'hangupcall'
== Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/1051-0000002e'
-- Registered SIP '1001' at 192.168.1.160:5060
-- Remote UNIX connection
-- Remote UNIX connection disconnected

EN MI CASA EL ROUTER TIENE CONFIGURADO LA NAT PARA LOS PUERTOS 5060 Y 5061
CON DESTINO HACIA LA CORRESPONDIENTE DIRECCION IP DEL SERVIDOR ASTERISK

**chitopunk** · 06-05-2012, 08:52 AM

Re: Tel Polycom se registra pero no se comunica

Puedo ver en tu salida esto:

== Everyone is busy/congested at this time (1:0/1/0)

Eso significa que a donde estas marcando no esta disponible, posiblemente codecs incompatibles..

Revisa que tu extensión tenga los codecs adecuados del polycom.

Saludos

**lsnadal** · 06-05-2012, 10:55 AM

Re: Tel Polycom se registra pero no se comunica

Perdón por no haber sido agradecido DESDA YA MUCHAS GRACIAS.

Utilice esta configuración de codec en el asterisk de mi casa ulaw&g729
y comenzaron a poder llamarse entre si e incluso llame al directo de mi oficina y veo en el identificador de llamada salta el numero de mi casa.

Pero no escucho la voz en ningun telefono. siempre hablando de los internos 1050 y 1051 que son los de prueba que tengo en mi oficina e intento conectarlos al asterisk de mi casa.

Desactive el firewall en el asterisk e incluso aparece el registro de la llamada en el asteriskcdrdb.

**lsnadal** · 06-05-2012, 11:10 AM

Re: Tel Polycom se registra pero no se comunica

MUCHISIMAS GRACIAS ESTA SOLUCIONADO APARENTEMENTE HABIA QUE REINICAR EL TELEFONO Y VOLVI A RESGISTRAR EL SOFTPHONE Y TODO ESTA FUCNIONANDO GRACIAS

Tel Polycom se registra pero no se comunica

Anuncio