Cursos Asterisk en México

Problemas con OH323

Colapsar

Anuncio

Colapsar
No hay anuncio todavía.
X
 
  • Filtrar
  • Tiempo
  • Mostrar
Limpiar Todo
nuevos mensajes

  • Problemas con OH323

    Hola!
    Estoy intentando utilizar el OH323, lo instalo sin problemas pero cuando quiero realizar una llamada obtengo el siguiewnte error:

    *CLI> -- Executing Dial("SIP/369-0522", "OH323/XXXXX@X.X.X.X|90|r") in new stack
    -- H.323 call to XXXXXX@X.X.X.X with codec(s) alaw ulaw g729
    -- Called XXXXXXX@X.X.X.X
    -- H.323 call 'ip$localhost/18319' cleared, reason 8 (Transport failure)
    -- OH323/L18319 is circuit-busy
    -- Hungup 'OH323/L18319'
    == Everyone is busy/congested at this time (1:0/1/0)
    Mar 4 18:44:16 WARNING[9062]: pbx.c:2028 ast_pbx_run: Timeout, but no rule 't' in context 'save-sip'

    Me suena como que esta llamando pero del otro lado no suena, que puede ser?

    Graciias
    Borro

  • #2
    Problemas con OH323

    o esta ocupado.
    Se necesitaria que mandes un log mas completo sin la ip de donde estas enviando la llamada, pero deja el numero.
    Usar la Busqueda antes de postear, no es una mala idea ;)
    A lo mejor alguien ya pregunto antes :D

    Mi Blog, si es spam, avisen y lo saco ;)
    [url="http://www.cesar.traficphone.com/"]http://www.cesar.traficphone.com/[/url]

    Comentario


    • #3
      Problemas con OH323

      Cesar te paso el LOG

      Al Levantar el MODULO

      == Parsing '/etc/asterisk/oh323.conf': Found
      0:00.002 asterisk-oh323 H323 Created endpoint.
      [2]WrapMutex::WrapMutex: Created mutex answerMutex
      [1]WrapH323EndPoint::WrapH323EndPoint: Compile-time libraries OpenH323 v1.13.5, PWlib v1.6.6
      [1]WrapGatekeeperServer::WrapGatekeeperServer: Creating new gatekeeper.
      [2]WrapperAPI::h323_end_point_create: Endpoint created.
      [3]WrapperAPI::h323_set_options: Setting endpoint options.
      [3]WrapperAPI::h323_set_options: FastStart option.
      [3]WrapperAPI::h323_set_options: H245Tunnelling option.
      [3]WrapperAPI::h323_set_options: H245InSetup option.
      [3]WrapperAPI::h323_set_options: Jitter options.
      [3]WrapperAPI::h323_set_options: RTP IP TOS option.
      [3]WrapperAPI::h323_set_ports: Setting endpoint port ranges.
      0:00.004 asterisk-oh323 H323 Started listener Listener[ip$*:1720]
      0:00.005 H323 Cleaner H323 Started cleaner thread
      [2]WrapperAPI::h323_start_listener: Started listener Listener[ip$*:1720]
      [2]WrapperAPI::h323_removeall_capabilities: Removing all capabilities.
      [3]WrapH323EndPoint::RemoveAllCapabilities: Removing all capabilities of local endpoint.
      0:00.007 asterisk-oh323 H323 Added capability: G.711-ALaw-64k{hw} <1>
      [2]WrapperAPI::h323_set_capability: Inserted capability G.711-ALaw-64k{hw}
      0:00.008 asterisk-oh323 H323 Added capability: G.711-uLaw-64k{hw} <2>
      [2]WrapperAPI::h323_set_capability: Inserted capability G.711-uLaw-64k{hw}
      0:00.010 asterisk-oh323 H323 Added capability: G.729{hw} <3>
      [2]WrapperAPI::h323_set_capability: Inserted capability G.729{hw}
      0:00.011 asterisk-oh323 H323 Added capability: UserInput/hookflash <4>
      0:00.011 asterisk-oh323 H323 Added capability: UserInput/basicString <5>
      0:00.012 asterisk-oh323 H323 Added capability: UserInput/dtmf <6>
      0:00.013 asterisk-oh323 H323 Added capability: UserInput/RFC2833 <7>
      [3]WrapperAPI::h323_set_senduimode: User-input mode set.
      [2]WrapperAPI::h323_set_gk: Configuring gatekeeper.
      [3]WrapH323EndPoint::SetGatekeeperTimeToLive: Gatekeeper registration TTL set at 600 sec
      [3]GKRegThread::GKRegThread: Unblock pipe - 18, 19
      [3]WrapperAPI::h323_callback_register: Callback functions installed.
      == Registered channel type 'OH323' (InAccess Networks OpenH323 Channel Driver)
      == OpenH323 Channel Ready (v0.7.1)

      AL HACER lLA LLAMADA

      -- Executing Dial("SIP/369-7219", "OH323/52190654@GW.GW.GW.GW|90|r") in new stack
      -- H.323 call to 52190654@GW.GW.GW.GW with codec(s) alaw ulaw g729
      [2]WrapperAPI::h323_make_call: Making call.
      [2]WrapH323EndPoint::MakeCall: Making call to 52190654@GW.GW.GW.GW
      1:33.354 ThreadID=0x489325c0 H323 Making call to: 52190654@GW.GW.GW.GW
      1:33.354 ThreadID=0x489325c0 H323 Added capability: G.711-ALaw-64k{hw} <1>
      1:33.354 ThreadID=0x489325c0 H323 Added capability: G.711-uLaw-64k{hw} <2>
      1:33.354 ThreadID=0x489325c0 H323 Added capability: G.729{hw} <3>
      1:33.354 ThreadID=0x489325c0 H323 Added capability: UserInput/hookflash <4>
      1:33.355 ThreadID=0x489325c0 H323 Added capability: UserInput/basicString <5>
      1:33.355 ThreadID=0x489325c0 H323 Added capability: UserInput/dtmf <6>
      1:33.355 ThreadID=0x489325c0 H323 Added capability: UserInput/RFC2833 <7>
      1:33.355 ThreadID=0x489325c0 H323 Found capability: G.711-ALaw-64k{hw} <1>
      1:33.355 ThreadID=0x489325c0 H323 Found capability: UserInput/hookflash <4>
      1:33.355 ThreadID=0x489325c0 H323 Found capability: UserInput/basicString <5>
      1:33.355 ThreadID=0x489325c0 H323 Found capability: UserInput/dtmf <6>
      1:33.355 ThreadID=0x489325c0 H323 Found capability: UserInput/RFC2833 <7>
      1:33.355 ThreadID=0x489325c0 H323 Found capability: G.711-uLaw-64k{hw} <2>
      1:33.355 ThreadID=0x489325c0 H323 Found capability: G.729{hw} <3>
      1:33.355 ThreadID=0x489325c0 RFC2833 Handler created
      1:33.356 ThreadID=0x489325c0 H323 Created new connection: ip$localhost/17042
      1:33.356 ThreadID=0x489325c0 H323 Added capability: G.711-ALaw-64k{hw} <1>
      [3]WrapH323Connection::SetLocalCapabilities: Outgoing capability G.711-ALaw-64k{hw}
      1:33.356 ThreadID=0x489325c0 H323 Added capability: G.711-uLaw-64k{hw} <2>
      [3]WrapH323Connection::SetLocalCapabilities: Outgoing capability G.711-uLaw-64k{hw}
      1:33.356 ThreadID=0x489325c0 H323 Added capability: G.729{hw} <3>
      [3]WrapH323Connection::SetLocalCapabilities: Outgoing capability G.729{hw}
      [3]WrapH323Connection::SetCallerID: Caller ID name on outgoing call Soporte
      [3]WrapH323Connection::SetCallerID: LocalPartyName Soporte
      [3]WrapH323Connection::SetCallerID: DestExtraCallInfo
      [3]WrapH323Connection::SetCallerID: Caller ID on outgoing call 369
      [3]WrapH323EndPoint::MakeCall: Call token is ip$localhost/17042
      [3]WrapH323EndPoint::MakeCall: Call reference is 17042
      -- Called 52190654@GW.GW.GW.GW
      1:33.357 H225 Caller:8169608 H225 Started call thread
      1:33.360 H225 Caller:8169608 H323TCP Started connection: host=GW.GW.GW.GW:1720, if=AS.AS.AS.AS:10000, handle=40
      1:33.360 H225 Caller:8169608 H225 Sending Setup PDU
      1:33.360 H225 Caller:8169608 H225 Check for Fast start by local endpoint
      1:33.360 H225 Caller:8169608 H245 Default OnSelectLogicalChannels, FastStartInitiate
      1:33.361 H225 Caller:8169608 RTP_UDP Session 1 created: AS.AS.AS.AS:10000-10001 ssrc=3216448583
      1:33.361 H225 Caller:8169608 RTP Adding session RTP_UDP
      1:33.361 H225 Caller:8169608 H323RTP Receiver created using session 1
      1:33.361 H225 Caller:8169608 RTP Found existing session 1
      1:33.361 H225 Caller:8169608 H323RTP Transmitter created using session 1
      1:33.362 H225 Caller:8169608 RTP Found existing session 1
      1:33.362 H225 Caller:8169608 H323RTP Receiver created using session 1
      1:33.362 H225 Caller:8169608 RTP Found existing session 1
      1:33.362 H225 Caller:8169608 H323RTP Transmitter created using session 1
      1:33.362 H225 Caller:8169608 RTP Found existing session 1
      1:33.362 H225 Caller:8169608 H323RTP Receiver created using session 1
      1:33.362 H225 Caller:8169608 RTP Found existing session 1
      1:33.362 H225 Caller:8169608 H323RTP Transmitter created using session 1
      1:33.363 H225 Caller:8169608 H225 Fast start begun by local endpoint
      1:33.363 H225 Caller:8169608 H323RTP OnSendingPDU
      1:33.363 H225 Caller:8169608 RTP OnSendingPDU
      1:33.364 H225 Caller:8169608 LID Created codec: pt=PCMA, bytes=1920, samples=8
      1:33.364 H225 Caller:8169608 H225 Built fastStart for G.711-ALaw-64k{hw} <1>
      1:33.366 H225 Caller:8169608 H323RTP OnSendingPDU
      1:33.367 H225 Caller:8169608 RTP OnSendingPDU
      1:33.368 H225 Caller:8169608 LID Created codec: pt=PCMA, bytes=160, samples=8
      1:33.370 H225 Caller:8169608 H225 Built fastStart for G.711-ALaw-64k{hw} <1>
      1:33.372 H225 Caller:8169608 H323RTP OnSendingPDU
      1:33.373 H225 Caller:8169608 RTP OnSendingPDU
      1:33.374 H225 Caller:8169608 LID Created codec: pt=PCMU, bytes=1920, samples=8
      1:33.375 H225 Caller:8169608 H225 Built fastStart for G.711-uLaw-64k{hw} <2>
      1:33.376 H225 Caller:8169608 H323RTP OnSendingPDU
      1:33.377 H225 Caller:8169608 RTP OnSendingPDU
      1:33.377 H225 Caller:8169608 LID Created codec: pt=PCMU, bytes=160, samples=8
      1:33.378 H225 Caller:8169608 H225 Built fastStart for G.711-uLaw-64k{hw} <2>
      1:33.379 H225 Caller:8169608 H323RTP OnSendingPDU
      1:33.380 H225 Caller:8169608 RTP OnSendingPDU
      1:33.380 H225 Caller:8169608 LID Created codec: pt=G729, bytes=10, samples=80
      1:33.381 H225 Caller:8169608 H225 Built fastStart for G.729{hw} <3>
      1:33.382 H225 Caller:8169608 H323RTP OnSendingPDU
      1:33.383 H225 Caller:8169608 RTP OnSendingPDU
      1:33.383 H225 Caller:8169608 LID Created codec: pt=G729, bytes=10, samples=80
      1:33.384 H225 Caller:8169608 H225 Built fastStart for G.729{hw} <3>
      [2]WrapH323Connection::OnSendSignalSetup: Sending SETUP message...
      [3]WrapH323Connection::OnSendSignalSetup: Setting display name Soporte
      [3]WrapH323Connection::OnSendSignalSetup: Setting calling party number 369
      1:33.385 H225 Caller:8169608 H225 Sending PDU: setup
      1:33.386 H225 Caller:8169608 H225 Reading PDUs: callRef=17042
      1:33.468 H225 Caller:8169608 H225 Read error (0):
      [2]WrapH323EndPoint::ClearCall: Request to clear call [ip$localhost/17042]
      1:33.469 H225 Caller:8169608 H323 Clearing connection ip$localhost/17042 reason=EndedByTransportFail
      1:33.469 H225 Caller:8169608 H323 Call end reason for ip$localhost/17042 set to EndedByTransportFail
      1:33.470 H225 Caller:8169608 H225 Sending release complete PDU: callRef=17042
      1:33.472 H225 Caller:8169608 H225 Sending PDU: releaseComplete
      1:33.472 H323 Cleaner H323 Cleaning up connections
      1:33.472 H323 Cleaner H323 Connection ip$localhost/17042 closing: connectionState=AwaitingSignalConnect
      1:33.473 H323 Cleaner H323RTP Cleaning up RTP T-0
      1:33.473 H323 Cleaner H323RTP Cleaning up RTP T-101
      1:33.473 H323 Cleaner H323RTP Cleaning up RTP T-0
      1:33.473 H323 Cleaner H323RTP Cleaning up RTP T-102
      1:33.473 H323 Cleaner H323RTP Cleaning up RTP T-0
      1:33.473 H323 Cleaner H323RTP Cleaning up RTP T-103
      1:33.473 H323 Cleaner RTP Releasing session 1
      1:33.473 H323 Cleaner H323 Bandwidth request: -0.0kb/s, available: 10000.0kb/s
      1:33.473 H323 Cleaner RTP Releasing session 1
      1:33.473 H323 Cleaner H323 Bandwidth request: -0.0kb/s, available: 10000.0kb/s
      1:33.473 H323 Cleaner RTP Releasing session 1
      1:33.473 H323 Cleaner H323 Bandwidth request: -0.0kb/s, available: 10000.0kb/s
      1:33.474 H323 Cleaner RTP Releasing session 1
      1:33.474 H323 Cleaner H323 Bandwidth request: -0.0kb/s, available: 10000.0kb/s
      1:33.474 H323 Cleaner RTP Releasing session 1
      1:33.474 H323 Cleaner H323 Bandwidth request: -0.0kb/s, available: 10000.0kb/s
      1:33.474 H323 Cleaner RTP Releasing session 1
      1:33.474 H323 Cleaner RTP Deleting session 1
      1:33.474 H323 Cleaner RTP_UDP Session 1, Shutting down read.
      1:33.474 H323 Cleaner RTP_UDP Session 1, Shutting down write.
      1:33.474 H323 Cleaner H323 Bandwidth request: -0.0kb/s, available: 10000.0kb/s
      1:33.475 H323 Cleaner H323 H323Transport::Close
      1:33.475 H323 Cleaner H323 H323Transport::CleanUpOnTermination for H225 Caller:8169608
      1:33.475 H225 Caller:8169608 H323 H323Transport::Close
      1:33.475 H225 Caller:8169608 H225 Signal channel closed.
      1:33.485 H323 Cleaner H323 Connection ip$localhost/17042 terminated.
      [2]WrapH323EndPoint::OnConnectionCleared: Connection [ip$localhost/17042] closed.
      -- H.323 call 'ip$localhost/17042' cleared, reason 8 (Transport failure)
      [2]WrapH323EndPoint::OnConnectionCleared: Call with "52190654" ended abnormally
      1:33.485 H323 Cleaner H323 Connection ip$localhost/17042 deleted.
      -- OH323/L17042 is circuit-busy
      -- Hungup 'OH323/L17042'
      == Everyone is busy/congested at this time (1:0/1/0)
      Mar 6 17:17:25 WARNING[3629]: pbx.c:2028 ast_pbx_run: Timeout, but no rule 't' in context 'save-sip'

      Comentario


      • #4
        Problemas con OH323

        El fallo que te da
        -- H.323 call 'ip$localhost/17042' cleared, reason 8 (Transport failure)
        parece ser por problemas de communication con el GK, asi que averigua primero si se ha registrado bien en el gk.

        Comentario


        • #5
          Re: Problemas con OH323

          Originalmente publicado por mehdi
          El fallo que te da
          -- H.323 call 'ip$localhost/17042' cleared, reason 8 (Transport failure)
          parece ser por problemas de communication con el GK, asi que averigua primero si se ha registrado bien en el gk.
          gracias por tu respuesta, era problema en el GK

          borro

          Comentario


          • #6
            Volviendo a retomar este tema del pasado, dado que mi problema es similar y no lo he podido resolver, le platico lo mio

            me pasa exactamente lo mismo que el compañero pero no se como configurar bien el archivo del oh323.conf

            aki les adjunto el error y mi configuracion del oh323.conf

            Executing Dial("SIP/506-41f8", "OH323/77900@X.X.X.X|90|Ttr") in new stack
            -- H.323 call to 77900@10.118.10.13 with codec(s) ulaw
            -- Outbound H.323 call to destination '77900@X.X.X.X', channel 'OH323/77900@X.X.X.X-84be15dc'.
            -- Called 77900@X.X.X.X
            -- H.323 call 'ip$localhost/12949-84be15dc' cleared, reason 8 (Transport failure)
            -- Hungup 'OH323/77900@X.X.X.X-84be15dc'
            == Everyone is busy/congested at this time (1:0/0/1)


            ; Configuration file of OpenH323 (OH323) channel driver

            [general]
            listenAddress=0.0.0.0
            listenPort=1720
            tcpStart=10000
            tcpEnd=20000
            udpStart=10000
            udpEnd=20000
            fastStart=no
            h245inSetup=no

            inBandDTMF=yes

            jitterMin=20
            jitterMax=100
            ipTos=none
            outboundMax=20
            inboundMax=20
            simultaneousMax=40
            wrapLibTraceLevel=1
            libTraceLevel=0
            libTraceFile=stdout
            Valid values for this option are:

            gatekeeper=X.X.X.X

            context=general

            [register]
            alias=ASTERISK
            context=general

            [codecs]
            codec=G711U
            frames=20

            no se en donde esta el problema dado ke me sigue apareciendo lo mismo

            Comentario


            • #7
              YO estoy utilizando oh323 sin gatekeeper. Para llamar a los demas dispositivos la extesion debe marcar el numero y la ip del dispositivo por ejemplo 103@ip.del.dispoisitivo.h323

              Comentario


              • #8
                Gracias por tu respuesta pero ya lo tengo configurado asi.

                Lo que me esta pasando eske marco y me dice que la conexion fue rechazada pero si marco varias veces, a veces 10, otras 20 una de las llamadas entra y puedo hablar perfectamente

                Lo que pasa eske me estoy conectando con otro conmutador avaya y el es el ke tiene las extensiones a las que quiero marcar, les asdjunto el extensions.conf para ke lo cheken

                exten => 1XXXX,1,SetGlobalVar(OH323_LADDR=ip.del.asterisk)
                exten => 1XXXX,2,SetGlobalVar(OH323_CHANCODEC=G711U)
                exten => 1XXXX,3,Dial(OH323/${EXTEN}@ip.del.avaya,90,Ttr)
                exten => 1XXXX,4,Hungup

                Comentario


                • #9
                  Hola que tal, tengo asterisk@home e instale el add-on de h323, el problema es que puedo lammar entre h323 pero no a extensiones SIP, me pueden ayudar por favor .. Gracias

                  Comentario


                  • #10
                    Hola destarita:

                    Yo tengo el Asterisk@Home 2.7 y quisiera saber si hay un add-on de h323 para mi version, o si el add-on es independiente de mi version de Asterisk. Y quisiera saber de donde puedo bajarlo, gracias.

                    Comentario


                    • #11
                      Hola necesto configurar el oh323.conf y el extensions.conf para probar 2 o mas clientes para corroborar la configuracion del asterisk

                      Comentario

                      Nube de Etiquetas

                      Colapsar

                      Principales Usuarios Activos

                      Colapsar

                      No hay usuarios activos superiores.
                      Trabajando...
                      X