Cursos Asterisk en México

[RESUELTO] regresas "Todas las lineas estan ocupadas" solo a ciertos numeros

Colapsar

Anuncio

Colapsar
No hay anuncio todavía.
X
 
  • Filtrar
  • Tiempo
  • Mostrar
Limpiar Todo
nuevos mensajes

  • [RESUELTO] regresas "Todas las lineas estan ocupadas" solo a ciertos numeros

    hola

    les comento que estoy teniendo algunos problemas con Elastix 2.4, al marcar ciertos numeros telefonicos me esta regresando el audio que todas las lineas estan ocupadas cuando en realidad tengo 20 troncales sip y no estan ocupadas ni 5, les paso el log de una llamada de las cuales siempre que marco ese numero me da este problema

    gracias de antemano por su ayuda

    == Using SIP RTP CoS mark 5
    -- Executing [98115155@Cel_Local:1] Macro("SIP/200-00000aea", "user-callerid,SKIPTTL,") in new stack
    -- Executing [s@macro-user-callerid:1] Set("SIP/200-00000aea", "AMPUSER=200") in new stack
    -- Executing [s@macro-user-callerid:2] GotoIf("SIP/200-00000aea", "0?report") in new stack
    -- Executing [s@macro-user-callerid:3] ExecIf("SIP/200-00000aea", "1?Set(REALCALLERIDNUM=200)") in new stack
    -- Executing [s@macro-user-callerid:4] Set("SIP/200-00000aea", "AMPUSER=200") in new stack
    -- Executing [s@macro-user-callerid:5] Set("SIP/200-00000aea", "AMPUSERCIDNAME=Jorge Casas") in new stack
    -- Executing [s@macro-user-callerid:6] GotoIf("SIP/200-00000aea", "0?report") in new stack
    -- Executing [s@macro-user-callerid:7] Set("SIP/200-00000aea", "AMPUSERCID=200") in new stack
    -- Executing [s@macro-user-callerid:8] Set("SIP/200-00000aea", "CALLERID(all)="Jorge Casas" <200>") in new stack
    -- Executing [s@macro-user-callerid:9] ExecIf("SIP/200-00000aea", "0?Set(CHANNEL(language)=)") in new stack
    -- Executing [s@macro-user-callerid:10] GotoIf("SIP/200-00000aea", "1?continue") in new stack
    -- Goto (macro-user-callerid,s,19)
    -- Executing [s@macro-user-callerid:19] Set("SIP/200-00000aea", "CALLERID(number)=200") in new stack
    -- Executing [s@macro-user-callerid:20] Set("SIP/200-00000aea", "CALLERID(name)=Jorge Casas") in new stack
    -- Executing [s@macro-user-callerid:21] NoOp("SIP/200-00000aea", "Using CallerID "Jorge Casas" <200>") in new stack
    -- Executing [98115155@Cel_Local:2] Macro("SIP/200-00000aea", "pinsets,1,1") in new stack
    -- Executing [s@macro-pinsets:1] GotoIf("SIP/200-00000aea", "1 = 1?cdr,1") in new stack
    -- Goto (macro-pinsets,cdr,1)
    -- Executing [cdr@macro-pinsets:1] ExecIf("SIP/200-00000aea", "1?Authenticate(/etc/asterisk/pinset_1,a)") in new stack
    -- <SIP/200-00000aea> Playing 'agent-pass.gsm' (language 'es')
    -- <SIP/200-00000aea> Playing 'auth-thankyou.gsm' (language 'es')
    -- Executing [cdr@macro-pinsets:2] ExecIf("SIP/200-00000aea", "1?ResetCDR()") in new stack
    -- Executing [98115155@Cel_Local:3] NoOp("SIP/200-00000aea", "Calling Out Route: locales") in new stack
    -- Executing [98115155@Cel_Local:4] Set("SIP/200-00000aea", "MOHCLASS=default") in new stack
    -- Executing [98115155@Cel_Local:5] Set("SIP/200-00000aea", "_NODEST=") in new stack
    -- Executing [98115155@Cel_Local:6] Macro("SIP/200-00000aea", "record-enable,200,OUT,") in new stack
    -- Executing [s@macro-record-enable:1] GotoIf("SIP/200-00000aea", "1?check") in new stack
    -- Goto (macro-record-enable,s,4)
    -- Executing [s@macro-record-enable:4] ExecIf("SIP/200-00000aea", "0?MacroExit()") in new stack
    -- Executing [s@macro-record-enable:5] GotoIf("SIP/200-00000aea", "0?Group:OUT") in new stack
    -- Goto (macro-record-enable,s,15)
    -- Executing [s@macro-record-enable:15] GotoIf("SIP/200-00000aea", "0?IN") in new stack
    -- Executing [s@macro-record-enable:16] ExecIf("SIP/200-00000aea", "1?MacroExit()") in new stack
    -- Executing [98115155@Cel_Local:7] Macro("SIP/200-00000aea", "dialout-trunk,3,8115155,") in new stack
    -- Executing [s@macro-dialout-trunk:1] Set("SIP/200-00000aea", "DIAL_TRUNK=3") in new stack
    -- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/200-00000aea", "0?sub-pincheck,s,1") in new stack
    -- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/200-00000aea", "0?disabletrunk,1") in new stack
    -- Executing [s@macro-dialout-trunk:4] Set("SIP/200-00000aea", "DIAL_NUMBER=8115155") in new stack
    -- Executing [s@macro-dialout-trunk:5] Set("SIP/200-00000aea", "DIAL_TRUNK_OPTIONS=tr") in new stack
    -- Executing [s@macro-dialout-trunk:6] Set("SIP/200-00000aea", "OUTBOUND_GROUP=OUT_3") in new stack
    -- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/200-00000aea", "1?nomax") in new stack

  • #2
    continuacion del log

    -- Goto (macro-dialout-trunk,s,9)
    -- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/200-00000aea", "0?skipoutcid") in new stack
    -- Executing [s@macro-dialout-trunk:10] Set("SIP/200-00000aea", "DIAL_TRUNK_OPTIONS=") in new stack
    -- Executing [s@macro-dialout-trunk:11] Macro("SIP/200-00000aea", "outbound-callerid,3") in new stack
    -- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/200-00000aea", "0?Set(CALLERPRES()=)") in new stack
    -- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/200-00000aea", "0?Set(REALCALLERIDNUM=200)") in new stack
    -- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/200-00000aea", "1?normcid") in new stack
    -- Goto (macro-outbound-callerid,s,6)
    -- Executing [s@macro-outbound-callerid:6] Set("SIP/200-00000aea", "USEROUTCID=") in new stack
    -- Executing [s@macro-outbound-callerid:7] Set("SIP/200-00000aea", "EMERGENCYCID=") in new stack
    -- Executing [s@macro-outbound-callerid:8] Set("SIP/200-00000aea", "TRUNKOUTCID=") in new stack
    -- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/200-00000aea", "1?trunkcid") in new stack
    -- Goto (macro-outbound-callerid,s,12)
    -- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/200-00000aea", "0?Set(CALLERID(all)=)") in new stack
    -- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/200-00000aea", "0?Set(CALLERID(all)=)") in new stack
    -- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/200-00000aea", "0?Set(CALLERID(all)=)") in new stack
    -- Executing [s@macro-outbound-callerid:15] ExecIf("SIP/200-00000aea", "0?Set(CALLERPRES()=prohib_passed_screen)") in new stack
    -- Executing [s@macro-dialout-trunk:12] GosubIf("SIP/200-00000aea", "0?sub-flp-3,s,1") in new stack
    -- Executing [s@macro-dialout-trunk:13] Set("SIP/200-00000aea", "OUTNUM=8115155") in new stack
    -- Executing [s@macro-dialout-trunk:14] Set("SIP/200-00000aea", "custom=SIP/alestra") in new stack
    -- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/200-00000aea", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)) ") in new stack
    -- Executing [s@macro-dialout-trunk:16] Macro("SIP/200-00000aea", "dialout-trunk-predial-hook,") in new stack
    -- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/200-00000aea", "") in new stack
    -- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/200-00000aea", "0?bypass,1") in new stack
    -- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/200-00000aea", "0?customtrunk") in new stack
    -- Executing [s@macro-dialout-trunk:19] Dial("SIP/200-00000aea", "SIP/alestra/8115155,300,") in new stack
    == Using SIP RTP TOS bits 184
    == Using SIP RTP CoS mark 5
    -- Called SIP/alestra/8115155
    -- SIP/alestra-00000aeb is making progress passing it to SIP/200-00000aea
    -- SIP/alestra-00000aeb is making progress passing it to SIP/200-00000aea
    -- Got SIP response 502 "Bad Gateway" back from 10.6.52.11:5060
    -- SIP/alestra-00000aeb is circuit-busy
    == Everyone is busy/congested at this time (1:0/1/0)
    -- Executing [s@macro-dialout-trunk:20] NoOp("SIP/200-00000aea", "Dial failed for some reason with DIALSTATUS = CONGESTION and HANGUPCAUSE = 27") in new stack
    -- Executing [s@macro-dialout-trunk:21] Goto("SIP/200-00000aea", "s-CONGESTION,1") in new stack
    -- Goto (macro-dialout-trunk,s-CONGESTION,1)
    -- Executing [s-CONGESTION@macro-dialout-trunk:1] Set("SIP/200-00000aea", "RC=27") in new stack
    -- Executing [s-CONGESTION@macro-dialout-trunk:2] Goto("SIP/200-00000aea", "27,1") in new stack
    -- Goto (macro-dialout-trunk,27,1)
    -- Executing [27@macro-dialout-trunk:1] Goto("SIP/200-00000aea", "continue,1") in new stack
    -- Goto (macro-dialout-trunk,continue,1)
    -- Executing [continue@macro-dialout-trunk:1] GotoIf("SIP/200-00000aea", "1?noreport") in new stack
    -- Goto (macro-dialout-trunk,continue,3)
    -- Executing [continue@macro-dialout-trunk:3] NoOp("SIP/200-00000aea", "TRUNK Dial failed due to CONGESTION HANGUPCAUSE: 27 - failing through to other trunks") in new stack
    -- Executing [continue@macro-dialout-trunk:4] Set("SIP/200-00000aea", "CALLERID(number)=200") in new stack
    -- Executing [98115155@Cel_Local:8] Macro("SIP/200-00000aea", "outisbusy,") in new stack
    -- Executing [s@macro-outisbusy:1] Progress("SIP/200-00000aea", "") in new stack
    -- Executing [s@macro-outisbusy:2] GotoIf("SIP/200-00000aea", "0?emergency,1") in new stack
    -- Executing [s@macro-outisbusy:3] GotoIf("SIP/200-00000aea", "0?intracompany,1") in new stack
    -- Executing [s@macro-outisbusy:4] Playback("SIP/200-00000aea", "all-circuits-busy-now&pls-try-call-later, noanswer") in new stack
    -- <SIP/200-00000aea> Playing 'all-circuits-busy-now.gsm' (language 'es')
    == Spawn extension (macro-outisbusy, s, 4) exited non-zero on 'SIP/200-00000aea' in macro 'outisbusy'
    == Spawn extension (Cel_Local, 98115155, 8) exited non-zero on 'SIP/200-00000aea'
    -- Executing [h@Cel_Local:1] Macro("SIP/200-00000aea", "hangupcall,") in new stack
    -- Executing [s@macro-hangupcall:1] GotoIf("SIP/200-00000aea", "1?endmixmoncheck") in new stack
    -- Goto (macro-hangupcall,s,9)
    -- Executing [s@macro-hangupcall:9] NoOp("SIP/200-00000aea", "End of MIXMON check") in new stack
    -- Executing [s@macro-hangupcall:10] GotoIf("SIP/200-00000aea", "1?nomeetmemon") in new stack
    -- Goto (macro-hangupcall,s,28)
    -- Executing [s@macro-hangupcall:28] NoOp("SIP/200-00000aea", "End of MEETME check") in new stack
    -- Executing [s@macro-hangupcall:29] GotoIf("SIP/200-00000aea", "1?noautomon") in new stack
    -- Goto (macro-hangupcall,s,34)
    -- Executing [s@macro-hangupcall:34] NoOp("SIP/200-00000aea", "TOUCH_MONITOR_OUTPUT=") in new stack
    -- Executing [s@macro-hangupcall:35] GotoIf("SIP/200-00000aea", "1?noautomon2") in new stack
    -- Goto (macro-hangupcall,s,41)
    -- Executing [s@macro-hangupcall:41] NoOp("SIP/200-00000aea", "MONITOR_FILENAME=") in new stack
    -- Executing [s@macro-hangupcall:42] GotoIf("SIP/200-00000aea", "1?skiprg") in new stack
    -- Goto (macro-hangupcall,s,45)
    -- Executing [s@macro-hangupcall:45] GotoIf("SIP/200-00000aea", "1?skipblkvm") in new stack
    -- Goto (macro-hangupcall,s,48)
    -- Executing [s@macro-hangupcall:48] GotoIf("SIP/200-00000aea", "1?theend") in new stack
    -- Goto (macro-hangupcall,s,50)
    -- Executing [s@macro-hangupcall:50] AGI("SIP/200-00000aea", "hangup.agi") in new stack
    -- Launched AGI Script /var/lib/asterisk/agi-bin/hangup.agi
    -- <SIP/200-00000aea>AGI Script hangup.agi completed, returning 0
    -- Executing [s@macro-hangupcall:51] Hangup("SIP/200-00000aea", "") in new stack
    == Spawn extension (macro-hangupcall, s, 51) exited non-zero on 'SIP/200-00000aea' in macro 'hangupcall'
    == Spawn extension (Cel_Local, h, 1) exited non-zero on 'SIP/200-00000aea'

    Comentario


    • #3
      Te recomiendo que sigas mi artículo: http://asteriskmx.com/version-mejora...de-elastix-v4/
      dCAP Christian Cabrera R.
      Para aprender a usar Asterisk, asiste a uno de mis cursos Asterisk
      Si deseas asesoría pagada, por favor contáctame

      Comentario


      • #4
        Muchas gracias

        funcionó muy bien

        saludos

        Comentario


        • #5
          quisiera saber que archivo puedo modificar para que no suene el tono de todas las lineas estan ocupadas, cuando marco a un numero telefonico y alguien mas llama al mismo al ultimo que llamo le sale el mensaje de todas las lineas estan ocupadas., sera que me puedes decir que archivo debo modificar., la version de elastix es 2.6

          saludos

          Comentario

          Principales Usuarios Activos

          Colapsar

          No hay usuarios activos superiores.
          Trabajando...
          X