[RESUELTO] Elastix 2.3 con E1 de Telmex

[Duquelin]

hola, les pido su ayuda para la instalacion, estoy instalando una tarjeta sangoma A101 con un E1 fraccionado de TELMEX con 10 canales unicamente y una tarjeta a a201 con 4 puertos para 4 troncales analogicas
ya logre que el hardware detector me detecte la tarjeta a101 y me ponga los canales en verde ... configure FREEPBX de Elastix .
pero aun asi NO logro hacer ni recibir llamadas
existe alguna guia? ya que no hay ninguna para elastix 2.3 que tiene varios cambios por el asterisk 1.8 y no encuenro nignuna info relacionada..
mil gracias de antemano

[Christian Cabrera]

Si estás usando Telmex lo más probable es que estés usando R2, y todos los autodetectores lo más que hacen es detectarte la tarjeta con ISDN.

Si estoy en lo correcto, sigue los pasos de este tutorial http://www.lastdragon.net/?p=361 para configurarla con R2.

Saludos,

[Duquelin]

Gracias Christian por tu orientacion,
pero esto es lo que me enfrento, la configuracion de todas las guias esta realizada para poner los parches para astrisk 1.4, pero por lo que se el 1.8 en elastix ya lo trae! y ahi es donde me estoy perdiendo!

[Marco Zink]

Entonces ya no es necesario que instales los parches, solo configura dahdi (/etc/dahdi/system.conf y /asterisk/chan_dahdi.conf o /asterisk/dahdi-channels.conf) con los parámetros de R2 y no olvides configurar Wanpipe.

[Duquelin]

no Jala !
ya hize todo y a marcar sigo teniendo tonos de ocupado!

[Duquelin]

al reiniciar el wanrouter me da el siguiente error
wanconfig: WAN device wanpipe2 did not shutdown
: ioctl(wanpipe2,ROUTER_DOWN) failed:
: 16 - Device or resource busy

[Christian Cabrera]

No puedes reiniciar wanrouter mientras tengas Asterisk corriendo. Deten Asterisk y luego reinicia wanrouter.

Péganos aquí tu configuración del system.conf, del chan_dahdi.conf y un ejemplo de lo que se ve en tu consola al momento en que avientas una llamada al exterior

[Duquelin]

system.CONF
#autogenerated by /usr/sbin/wancfg_dahdi do not hand edit
#autogenrated on 2009-11-12
#Dahdi Channels Configurations
#For detailed Dahdi options, view /etc/dahdi/system.conf
loadzone=mx
defaultzone=mx
#Sangoma A101 port 1 [slot:4 bus:4 span:1] <wanpipe1>
#;span=1,0,0,ccs,hdb3
#;bchan=1-15,17-31
#;echocanceller=mg2,1-15,17-31
#;hardhdlc=16
span=1,1,0,cas,hdb3
cas=1-15:1101
dchan=16
cas=17-31:1101
echocanceller=mg2,1-15,17-31

chan_dahdi.conf
; Auto-generated by /usr/sbin/hardware_detector
[trunkgroups]

[channels]
context=from-pstn
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
relaxdtmf=yes
signalling=mfcr2
mfcr2_variant=mx
mfcr2_get_ani_first=no
mfcr2_max_ani=10
mfcr2_max_dnis=4
mfcr2_category=national_subscriber
mfcr2_call_files=yes
mfcr2_logdir=span1
mfcr2_logging=all
mfcr2_mfback_timeout=-1
mfcr2_metering_pulse_timeout=-1
channel => 1-15,17-31


;Uncomment these lines if you have problems with the disconection of your analog lines
;busydetect=yes
;busycount=3


immediate=no

#include dahdi-channels.conf
#include chan_dahdi_additional.conf

[Christian Cabrera]

Cambia dchan=16 por hardhdlc=16.

Reinicia todos los servicios y péganos la salida del CLI de Asterisk cuando intentas hacer una llamada.

[Duquelin]

hay les va en dos partes
Connected to Asterisk 1.8.11.0 currently running on conmutador (pid = 3432)
Verbosity is at least 3
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Executing [93989020@from-internal:1] Macro("SIP/115-00000000", "user-call erid,SKIPTTL,") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/115-00000000", "AMPUSER=115" ) in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/115-00000000", "0?report" ) in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("SIP/115-00000000", "1?Set(REA LCALLERIDNUM=115)") in new stack
-- Executing [s@macro-user-callerid:4] Set("SIP/115-00000000", "AMPUSER=115" ) in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/115-00000000", "AMPUSERCIDNA ME=ING. ALAN DUQUE") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("SIP/115-00000000", "0?report" ) in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/115-00000000", "AMPUSERCID=1 15") in new stack
-- Executing [s@macro-user-callerid:8] Set("SIP/115-00000000", "CALLERID(all )="ING. ALAN DUQUE" <115>") in new stack
-- Executing [s@macro-user-callerid:9] ExecIf("SIP/115-00000000", "0?Set(CHA NNEL(language)=)") in new stack
-- Executing [s@macro-user-callerid:10] GotoIf("SIP/115-00000000", "1?contin ue") in new stack
-- Goto (macro-user-callerid,s,19)
-- Executing [s@macro-user-callerid:19] Set("SIP/115-00000000", "CALLERID(nu mber)=115") in new stack
-- Executing [s@macro-user-callerid:20] Set("SIP/115-00000000", "CALLERID(na me)=ING. ALAN DUQUE") in new stack
-- Executing [s@macro-user-callerid:21] NoOp("SIP/115-00000000", "Using Call erID "ING. ALAN DUQUE" <115>") in new stack
-- Executing [93989020@from-internal:2] NoOp("SIP/115-00000000", "Calling Ou t Route: 9_outside") in new stack
-- Executing [93989020@from-internal:3] Set("SIP/115-00000000", "_NODEST=") in new stack
-- Executing [93989020@from-internal:4] Macro("SIP/115-00000000", "record-en able,115,OUT,") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("SIP/115-00000000", "1?check") in new stack
-- Goto (macro-record-enable,s,4)

[Duquelin]

-- Executing [s@macro-record-enable:4] ExecIf("SIP/115-00000000", "0?MacroEx it()") in new stack
-- Executing [s@macro-record-enable:5] GotoIf("SIP/115-00000000", "0?Group:O UT") in new stack
-- Goto (macro-record-enable,s,15)
-- Executing [s@macro-record-enable:15] GotoIf("SIP/115-00000000", "0?IN") i n new stack
-- Executing [s@macro-record-enable:16] ExecIf("SIP/115-00000000", "1?MacroE xit()") in new stack
-- Executing [93989020@from-internal:5] Macro("SIP/115-00000000", "dialout-t runk,1,3989020,") in new stack
-- Executing [s@macro-dialout-trunk:1] Set("SIP/115-00000000", "DIAL_TRUNK=1 ") in new stack
-- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/115-00000000", "0?sub-pi ncheck,s,1") in new stack
-- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/115-00000000", "0?disable trunk,1") in new stack
-- Executing [s@macro-dialout-trunk:4] Set("SIP/115-00000000", "DIAL_NUMBER= 3989020") in new stack
-- Executing [s@macro-dialout-trunk:5] Set("SIP/115-00000000", "DIAL_TRUNK_O PTIONS=tr") in new stack
-- Executing [s@macro-dialout-trunk:6] Set("SIP/115-00000000", "OUTBOUND_GRO UP=OUT_1") in new stack
-- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/115-00000000", "1?nomax") in new stack
-- Goto (macro-dialout-trunk,s,9)
-- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/115-00000000", "0?skipout cid") in new stack
-- Executing [s@macro-dialout-trunk:10] Set("SIP/115-00000000", "DIAL_TRUNK_ OPTIONS=") in new stack
-- Executing [s@macro-dialout-trunk:11] Macro("SIP/115-00000000", "outbound- callerid,1") in new stack

[Duquelin]

-- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/115-00000000", "0?Set (CALLERPRES()=)") in new stack
-- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/115-00000000", "0?Set (REALCALLERIDNUM=115)") in new stack
-- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/115-00000000", "1?nor mcid") in new stack
-- Goto (macro-outbound-callerid,s,6)
-- Executing [s@macro-outbound-callerid:6] Set("SIP/115-00000000", "USEROUTC ID=") in new stack
-- Executing [s@macro-outbound-callerid:7] Set("SIP/115-00000000", "EMERGENC YCID=") in new stack
-- Executing [s@macro-outbound-callerid:8] Set("SIP/115-00000000", "TRUNKOUT CID=") in new stack
-- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/115-00000000", "1?tru nkcid") in new stack
-- Goto (macro-outbound-callerid,s,12)
-- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/115-00000000", "0?Se t(CALLERID(all)=)") in new stack
-- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/115-00000000", "0?Se t(CALLERID(all)=)") in new stack
-- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/115-00000000", "0?Se t(CALLERID(all)=)") in new stack
-- Executing [s@macro-outbound-callerid:15] ExecIf("SIP/115-00000000", "0?Se t(CALLERPRES()=prohib_passed_screen)") in new stack
-- Executing [s@macro-dialout-trunk:12] GosubIf("SIP/115-00000000", "0?sub-f lp-1,s,1") in new stack
-- Executing [s@macro-dialout-trunk:13] Set("SIP/115-00000000", "OUTNUM=3989 020") in new stack
-- Executing [s@macro-dialout-trunk:14] Set("SIP/115-00000000", "custom=DAHD I/g0") in new stack

[Duquelin]

-- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/115-00000000", "0?Set(DI AL_TRUNK_OPTIONS=M(setmusic^))") in new stack
-- Executing [s@macro-dialout-trunk:16] Macro("SIP/115-00000000", "dialout-t runk-predial-hook,") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/115-00000 000", "") in new stack
-- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/115-00000000", "0?bypass ,1") in new stack
-- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/115-00000000", "0?custom trunk") in new stack
-- Executing [s@macro-dialout-trunk:19] Dial("SIP/115-00000000", "DAHDI/g0/3 989020,300,") in new stack
[Dec 11 10:47:23] WARNING[3876]: app_dial.c:2218 dial_exec_full: Unable to creat e channel of type 'DAHDI' (cause 34 - Circuit/channel congestion)
== Everyone is busy/congested at this time (1:0/1/0)
-- Executing [s@macro-dialout-trunk:20] NoOp("SIP/115-00000000", "Dial faile d for some reason with DIALSTATUS = CONGESTION and HANGUPCAUSE = 34") in new sta ck
-- Executing [s@macro-dialout-trunk:21] Goto("SIP/115-00000000", "s-CONGESTI ON,1") in new stack
-- Goto (macro-dialout-trunk,s-CONGESTION,1)
-- Executing [s-CONGESTION@macro-dialout-trunk:1] Set("SIP/115-00000000", "R C=34") in new stack
-- Executing [s-CONGESTION@macro-dialout-trunk:2] Goto("SIP/115-00000000", " 34,1") in new stack
-- Goto (macro-dialout-trunk,34,1)
-- Executing [34@macro-dialout-trunk:1] Goto("SIP/115-00000000", "continue,1 ") in new stack
-- Goto (macro-dialout-trunk,continue,1)
-- Executing [continue@macro-dialout-trunk:1] GotoIf("SIP/115-00000000", "1? noreport") in new stack

[Duquelin]

-- Goto (macro-dialout-trunk,continue,3)
-- Executing [continue@macro-dialout-trunk:3] NoOp("SIP/115-00000000", "TRUN K Dial failed due to CONGESTION HANGUPCAUSE: 34 - failing through to other trunk s") in new stack
-- Executing [continue@macro-dialout-trunk:4] Set("SIP/115-00000000", "CALLE RID(number)=115") in new stack
-- Executing [93989020@from-internal:6] Macro("SIP/115-00000000", "outisbusy ,") in new stack
-- Executing [s@macro-outisbusy:1] Progress("SIP/115-00000000", "") in new s tack
-- Executing [s@macro-outisbusy:2] GotoIf("SIP/115-00000000", "0?emergency,1 ") in new stack
-- Executing [s@macro-outisbusy:3] GotoIf("SIP/115-00000000", "0?intracompan y,1") in new stack
-- Executing [s@macro-outisbusy:4] Playback("SIP/115-00000000", "all-circuit s-busy-now&pls-try-call-later, noanswer") in new stack
-- <SIP/115-00000000> Playing 'all-circuits-busy-now.gsm' (language 'en')
-- <SIP/115-00000000> Playing 'pls-try-call-later.gsm' (language 'en')
-- Executing [s@macro-outisbusy:5] Congestion("SIP/115-00000000", "20") in n ew stack
[Dec 11 10:47:27] WARNING[3876]: channel.c:4650 ast_prod: Prodding channel 'SIP/ 115-00000000' failed
== Spawn extension (macro-outisbusy, s, 5) exited non-zero on 'SIP/115-0000000 0' in macro 'outisbusy'
== Spawn extension (from-internal, 93989020, 6) exited non-zero on 'SIP/115-00 000000'
-- Executing [h@from-internal:1] Macro("SIP/115-00000000", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] GotoIf("SIP/115-00000000", "1?endmixmonc heck") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] NoOp("SIP/115-00000000", "End of MIXMON check") in new stack
-- Executing [s@macro-hangupcall:10] GotoIf("SIP/115-00000000", "1?nomeetmem on") in new stack
-- Goto (macro-hangupcall,s,15)
-- Executing [s@macro-hangupcall:15] NoOp("SIP/115-00000000", "MEETME_RECORD INGFILE=") in new stack
-- Executing [s@macro-hangupcall:16] GotoIf("SIP/115-00000000", "1?noautomon ") in new stack
-- Goto (macro-hangupcall,s,18)
-- Executing [s@macro-hangupcall:18] NoOp("SIP/115-00000000", "TOUCH_MONITOR _OUTPUT=") in new stack
-- Executing [s@macro-hangupcall:19] GotoIf("SIP/115-00000000", "1?noautomon 2") in new stack
-- Goto (macro-hangupcall,s,25)
-- Executing [s@macro-hangupcall:25] NoOp("SIP/115-00000000", "MONITOR_FILEN AME=") in new stack
-- Executing [s@macro-hangupcall:26] GotoIf("SIP/115-00000000", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,29)
-- Executing [s@macro-hangupcall:29] GotoIf("SIP/115-00000000", "1?skipblkvm ") in new stack
-- Goto (macro-hangupcall,s,32)
-- Executing [s@macro-hangupcall:32] GotoIf("SIP/115-00000000", "1?theend") in new stack
-- Goto (macro-hangupcall,s,34)
-- Executing [s@macro-hangupcall:34] Hangup("SIP/115-00000000", "") in new s tack
== Spawn extension (macro-hangupcall, s, 34) exited non-zero on 'SIP/115-00000 000' in macro 'hangupcall'
== Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/115-00000000'
[Dec 11 10:48:26] NOTICE[3608]: chan_sip.c:20788 handle_response_peerpoke: Peer '115' is now Lagged. (2015ms / 2000ms)
[Dec 11 10:48:37] NOTICE[3608]: chan_sip.c:20788 handle_response_peerpoke: Peer '115' is now Reachable. (882ms / 2000ms)

[Christian Cabrera]

Ok, según el error, dice que no tienes canales disponibles.

¿Qué te arroja el "mfcr2 show channels" dentro del Asterisk CLI?

¿Qué te arroja el "wanpipemon -i w1g1 -c Ta" dentro del Linux CLI?