[RESUELTO] Interconexion de dos ELASTIX

[ecazarez]

Buenos dias tengo conectado 2 Elastix por medio de una Truk SIP y cuando marco a travez de la interconexion siempre me marca "all circuit are busy now" que puedo estar haciendo mal?

[Christian Cabrera]

Suena a problema de autenticación entre los 2 equipos. Necesitariamos ver la configuración de la troncal de ambos y ver la consola al momento en que te genera el error para tener una mejor idea de donde está el problema.

Saludos,

[Marco Zink]

Habría que ver qué te arroja la consola cuando intentas la llamada, de paso compártenos la configuración en ambos extremos de la troncal SIP.

[ecazarez]

A:

host=192.168.x.x ( VPN )
username=xxxxxxxxxxxx
fromuser=yyyyyyyyyyy
secret=password
type=friend
qualify=yes
disallow=all
allow=all
context=default

B:

host=192.168.y.y ( VPN )
username=yyyyyyyyyy
fromuser=xxxxxxxxxxxx
secret=password
type=friend
qualify=yes
disallow=all
allow=all
context=default

[ecazarez]

Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
================================================== =======================
== Parsing '/etc/asterisk/asterisk.conf': == Found
== Parsing '/etc/asterisk/extconfig.conf': == Found
Connected to Asterisk 1.8.18.0 currently running on voipltx (pid = 3304)
Verbosity was 8 and is now 11
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Executing [100@from-internal:1] Macro("SIP/200-00000021", "user-callerid,SKIPTTL,") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/200-00000021", "AMPUSER=200") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/200-00000021", "0?report") in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("SIP/200-00000021", "1?Set(REALCALLERIDNUM=200)") in new stack
-- Executing [s@macro-user-callerid:4] Set("SIP/200-00000021", "AMPUSER=200") in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/200-00000021", "AMPUSERCIDNAME=Recepcion") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("SIP/200-00000021", "0?report") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/200-00000021", "AMPUSERCID=200") in new stack
-- Executing [s@macro-user-callerid:8] Set("SIP/200-00000021", "CALLERID(all)="Recepcion" <200>") in new stack
-- Executing [s@macro-user-callerid:9] ExecIf("SIP/200-00000021", "0?Set(CHANNEL(language)=)") in new stack
-- Executing [s@macro-user-callerid:10] GotoIf("SIP/200-00000021", "1?continue") in new stack
-- Goto (macro-user-callerid,s,19)
-- Executing [s@macro-user-callerid:19] Set("SIP/200-00000021", "CALLERID(number)=200") in new stack
-- Executing [s@macro-user-callerid:20] Set("SIP/200-00000021", "CALLERID(name)=Recepcion") in new stack
-- Executing [s@macro-user-callerid:21] NoOp("SIP/200-00000021", "Using CallerID "Recepcion" <200>") in new stack
-- Executing [100@from-internal:2] NoOp("SIP/200-00000021", "Calling Out Route: NLD-Office-ext") in new stack
-- Executing [100@from-internal:3] Set("SIP/200-00000021", "MOHCLASS=default") in new stack
-- Executing [100@from-internal:4] Set("SIP/200-00000021", "_NODEST=") in new stack
-- Executing [100@from-internal:5] Macro("SIP/200-00000021", "record-enable,200,OUT,") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("SIP/200-00000021", "1?check") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] ExecIf("SIP/200-00000021", "0?MacroExit()") in new stack
-- Executing [s@macro-record-enable:5] GotoIf("SIP/200-00000021", "0?Group:OUT") in new stack
-- Goto (macro-record-enable,s,15)
-- Executing [s@macro-record-enable:15] GotoIf("SIP/200-00000021", "0?IN") in new stack
-- Executing [s@macro-record-enable:16] ExecIf("SIP/200-00000021", "1?MacroExit()") in new stack
-- Executing [100@from-internal:6] Macro("SIP/200-00000021", "dialout-trunk,2,100,") in new stack
-- Executing [s@macro-dialout-trunk:1] Set("SIP/200-00000021", "DIAL_TRUNK=2") in new stack
-- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/200-00000021", "0?sub-pincheck,s,1") in new stack
-- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/200-00000021", "0?disabletrunk,1") in new stack
-- Executing [s@macro-dialout-trunk:4] Set("SIP/200-00000021", "DIAL_NUMBER=100") in new stack
-- Executing [s@macro-dialout-trunk:5] Set("SIP/200-00000021", "DIAL_TRUNK_OPTIONS=tr") in new stack
-- Executing [s@macro-dialout-trunk:6] Set("SIP/200-00000021", "OUTBOUND_GROUP=OUT_2") in new stack
-- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/200-00000021", "1?nomax") in new stack
-- Goto (macro-dialout-trunk,s,9)
-- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/200-00000021", "0?skipoutcid") in new stack
-- Executing [s@macro-dialout-trunk:10] Set("SIP/200-00000021", "DIAL_TRUNK_OPTIONS=") in new stack
-- Executing [s@macro-dialout-trunk:11] Macro("SIP/200-00000021", "outbound-callerid,2") in new stack
-- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/200-00000021", "0?Set(CALLERPRES()=)") in new stack
-- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/200-00000021", "0?Set(REALCALLERIDNUM=200)") in new stack
-- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/200-00000021", "1?normcid") in new stack
-- Goto (macro-outbound-callerid,s,6)
-- Executing [s@macro-outbound-callerid:6] Set("SIP/200-00000021", "USEROUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:7] Set("SIP/200-00000021", "EMERGENCYCID=") in new stack
-- Executing [s@macro-outbound-callerid:8] Set("SIP/200-00000021", "TRUNKOUTCID=Oficina Laredo Texas") in new stack
-- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/200-00000021", "1?trunkcid") in new stack
-- Goto (macro-outbound-callerid,s,12)
-- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/200-00000021", "1?Set(CALLERID(all)=Oficina Laredo Texas)") in new stack
-- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/200-00000021", "0?Set(CALLERID(all)=)") in new stack
-- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/200-00000021", "0?Set(CALLERID(all)=)") in new stack
-- Executing [s@macro-outbound-callerid:15] ExecIf("SIP/200-00000021", "0?Set(CALLERPRES()=prohib_passed_screen)") in new stack
-- Executing [s@macro-dialout-trunk:12] GosubIf("SIP/200-00000021", "0?sub-flp-2,s,1") in new stack
-- Executing [s@macro-dialout-trunk:13] Set("SIP/200-00000021", "OUTNUM=100") in new stack
-- Executing [s@macro-dialout-trunk:14] Set("SIP/200-00000021", "custom=SIP/Interconexion-NLD") in new stack
-- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/200-00000021", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)) ") in new stack
-- Executing [s@macro-dialout-trunk:16] Macro("SIP/200-00000021", "dialout-trunk-predial-hook,") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/200-00000021", "") in new stack
-- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/200-00000021", "0?bypass,1") in new stack
-- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/200-00000021", "0?customtrunk") in new stack
-- Executing [s@macro-dialout-trunk:19] Dial("SIP/200-00000021", "SIP/Interconexion-NLD/100,300,") in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Called SIP/Interconexion-NLD/100

[ecazarez]

== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [s@macro-dialout-trunk:20] NoOp("SIP/200-00000025", "Dial failed for some reason with DIALSTATUS = CHANUNAVAIL and HANGUPCAUSE = 21") in new stack
-- Executing [s@macro-dialout-trunk:21] Goto("SIP/200-00000025", "s-CHANUNAVAIL,1") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] Set("SIP/200-00000025", "RC=21") in new stack
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk:2] Goto("SIP/200-00000025", "21,1") in new stack
-- Goto (macro-dialout-trunk,21,1)
-- Executing [21@macro-dialout-trunk:1] Goto("SIP/200-00000025", "continue,1") in new stack
-- Goto (macro-dialout-trunk,continue,1)
-- Executing [continue@macro-dialout-trunk:1] GotoIf("SIP/200-00000025", "1?noreport") in new stack
-- Goto (macro-dialout-trunk,continue,3)
-- Executing [continue@macro-dialout-trunk:3] NoOp("SIP/200-00000025", "TRUNK Dial failed due to CHANUNAVAIL HANGUPCAUSE: 21 - failing through to other trunks") in new stack
-- Executing [continue@macro-dialout-trunk:4] Set("SIP/200-00000025", "CALLERID(number)=200") in new stack
-- Executing [100@from-internal:7] Macro("SIP/200-00000025", "outisbusy,") in new stack
-- Executing [s@macro-outisbusy:1] Progress("SIP/200-00000025", "") in new stack
-- Executing [s@macro-outisbusy:2] GotoIf("SIP/200-00000025", "0?emergency,1") in new stack
-- Executing [s@macro-outisbusy:3] GotoIf("SIP/200-00000025", "0?intracompany,1") in new stack
-- Executing [s@macro-outisbusy:4] Playback("SIP/200-00000025", "all-circuits-busy-now&pls-try-call-later, noanswer") in new stack
-- <SIP/200-00000025> Playing 'all-circuits-busy-now.gsm' (language 'en')
-- <SIP/200-00000025> Playing 'pls-try-call-later.gsm' (language 'en')
-- Executing [s@macro-outisbusy:5] Congestion("SIP/200-00000025", "20") in new stack
== Spawn extension (macro-outisbusy, s, 5) exited non-zero on 'SIP/200-00000025' in macro 'outisbusy'
== Spawn extension (from-internal, 100, 7) exited non-zero on 'SIP/200-00000025'
-- Executing [h@from-internal:1] Macro("SIP/200-00000025", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] GotoIf("SIP/200-00000025", "1?endmixmoncheck") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] NoOp("SIP/200-00000025", "End of MIXMON check") in new stack
-- Executing [s@macro-hangupcall:10] GotoIf("SIP/200-00000025", "1?nomeetmemon") in new stack
-- Goto (macro-hangupcall,s,28)
-- Executing [s@macro-hangupcall:28] NoOp("SIP/200-00000025", "End of MEETME check") in new stack
-- Executing [s@macro-hangupcall:29] GotoIf("SIP/200-00000025", "1?noautomon") in new stack
-- Goto (macro-hangupcall,s,34)
-- Executing [s@macro-hangupcall:34] NoOp("SIP/200-00000025", "TOUCH_MONITOR_OUTPUT=") in new stack
-- Executing [s@macro-hangupcall:35] GotoIf("SIP/200-00000025", "1?noautomon2") in new stack
-- Goto (macro-hangupcall,s,41)
-- Executing [s@macro-hangupcall:41] NoOp("SIP/200-00000025", "MONITOR_FILENAME=") in new stack
-- Executing [s@macro-hangupcall:42] GotoIf("SIP/200-00000025", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,45)
-- Executing [s@macro-hangupcall:45] GotoIf("SIP/200-00000025", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,48)
-- Executing [s@macro-hangupcall:48] GotoIf("SIP/200-00000025", "1?theend") in new stack
-- Goto (macro-hangupcall,s,50)
-- Executing [s@macro-hangupcall:50] AGI("SIP/200-00000025", "hangup.agi") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/hangup.agi
-- <SIP/200-00000025>AGI Script hangup.agi completed, returning 0
-- Executing [s@macro-hangupcall:51] Hangup("SIP/200-00000025", "") in new stack
== Spawn extension (macro-hangupcall, s, 51) exited non-zero on 'SIP/200-00000025' in macro 'hangupcall'
== Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/200-00000025'

[Christian Cabrera]

Precisamente la parte que nos importa del envio de la llamada no alcanza a salir. Por favor, pega el faltante.

También veo que en tu configuración tienes los campos de fromuser, los cuales según yo deberían ser iguales que en username. A reserva de ver la razón por la que la llamada no pasa, yo haría este cambio:

A:

Trunk Name (peer): yyyyyyyyyyy

host=192.168.x.x ( VPN )
username=xxxxxxxxxxxx
fromuser=xxxxxxxxxxx
secret=password
type=friend
qualify=yes
disallow=all
allow=all
context=default

B:

Trunk Name (peer): xxxxxxxxxxxx

host=192.168.y.y ( VPN )
username=yyyyyyyyyy
fromuser=yyyyyyyyyy
secret=password
type=friend
qualify=yes
disallow=all
allow=all
context=default

[ecazarez]

Muchachos muchas gracias por su ayuda ya pude resolver el problema con esta configuración en las troncales IAX2 que me encontré en internet:

TRUNK NAME: interconexion-123

host=serverb
username=interconexion-321
secret=password
encryption=aes128
auth=md5
type=friend
context=from-internal
trunk=yes
requirecalltoken=no

TRUNK NAME: interconexion-321

host=servera
username=interconexion-123
secret=password
encryption=aes128
auth=md5
type=friend
context=from-internal
trunk=yes
requirecalltoken=no

[Christian Cabrera]

Justamente eso era lo que buscaba mostrarte: el TRUNK NAME tiene que ser igual que el USERNAMe del equipo que está en el otro lado,de lo contrario te daría un "No authority found"