Cursos Asterisk en México

Problema con puertos E1 con Asterisk y Sony Erisson

Colapsar

Anuncio

Colapsar
No hay anuncio todavía.
X
Colapsar
 
  • Página de 1
  • Filtrar
  • Tiempo
  • Mostrar
Limpiar Todo
nuevos mensajes
Anterior template Próximo
  • #1

    Problema con puertos E1 con Asterisk y Sony Erisson

    Buenos Días:
    Tengo un problema, uní una planta asterisk con una Erisson mediante dos E1, hasta ahi todo bien. Se hacen llamadas salientes como entrantes pero por solo el primer canal de cada uno de los flujos, por los demás canales las llamadas se realizan pero se caen, dándome el siguiente error:
    [10:01:12:273] [Thread: 3067456400] [Chan 3] - Call started at Tue Jul 15 10:01:12 2014 on chan 3 [openr2 version 1.3.3, revision (release)]
    [10:01:12:273] [Thread: 3067456400] [Chan 3] - Initialized R2 MF detector
    [10:01:12:273] [Thread: 3067456400] [Chan 3] - CAS Tx >> [SEIZE ACK] 0x0C
    [10:01:12:273] [Thread: 3067456400] [Chan 3] - CAS Raw Tx >> 0x0D
    [10:01:26:606] [Thread: 3067456400] [Chan 3] - Bits changed from 0x00 to 0x08
    [10:01:26:606] [Thread: 3067456400] [Chan 3] - CAS Rx << [CLEAR FORWARD] 0x08
    [10:01:26:606] [Thread: 3067456400] [Chan 3] - Far end disconnected. Reason: Normal Clearing
    [10:01:26:606] [Thread: 3067456400] [Chan 3] - Call ended
    [10:01:26:606] [Thread: 3067456400] [Chan 3] - Attempting to cancel timer timer 0
    [10:01:26:606] [Thread: 3067456400] [Chan 3] - Cannot cancel timer 0
    Editado por última vez por rainer; https://asteriskmx.org/foros/member/2308-rainer en 07-16-2014, 10:44 AM.
    Etiquetas: Ninguno
  • #2
    Problema con puertos E1 con Asterisk

    Buenos Días:
    Tengo un problema, uní una planta asterisk con una Erisson mediante dos E1, hasta ahi todo bien. Se hacen llamadas salientes como entrantes pero por solo el primer canal de cada uno de los flujos, por los demás canales las llamadas se realizan pero se caen, dándome el siguiente error:
    [10:01:12:273] [Thread: 3067456400] [Chan 3] - Call started at Tue Jul 15 10:01:12 2014 on chan 3 [openr2 version 1.3.3, revision (release)]
    [10:01:12:273] [Thread: 3067456400] [Chan 3] - Initialized R2 MF detector
    [10:01:12:273] [Thread: 3067456400] [Chan 3] - CAS Tx >> [SEIZE ACK] 0x0C
    [10:01:12:273] [Thread: 3067456400] [Chan 3] - CAS Raw Tx >> 0x0D
    [10:01:26:606] [Thread: 3067456400] [Chan 3] - Bits changed from 0x00 to 0x08
    [10:01:26:606] [Thread: 3067456400] [Chan 3] - CAS Rx << [CLEAR FORWARD] 0x08
    [10:01:26:606] [Thread: 3067456400] [Chan 3] - Far end disconnected. Reason: Normal Clearing
    [10:01:26:606] [Thread: 3067456400] [Chan 3] - Call ended
    [10:01:26:606] [Thread: 3067456400] [Chan 3] - Attempting to cancel timer timer 0
    [10:01:26:606] [Thread: 3067456400] [Chan 3] - Cannot cancel timer 0

    Comentario

    • #3
      Hola Rainer,

      Nos puedes mostrar tus archivos de configuración (dahdi/system.conf, asterisk/chan_dahdi.conf y/o asterisk/dahdi-channels.conf), si tu tarjeta es Sangoma muéstranos también tus archivos wanpipe*.conf?

      Saludos
      IT Specialist

      Comentario

      • #4
        Gracias de antemanos, no uso tarjeta, tengo Xorcom Astribank
        Mis archivos de configuración son:
        system.conf

        # Span 1: XBUS-00/XPD-00 "Xorcom XPD [usb:X1061826].1: E1" (MASTER) HDB3 ClockSource
        span=1,1,0,cas,hdb3
        cas=1-15:1101
        cas=17-31:1101
        dchan=16
        echocanceller=oslec,1-15,17-31

        # Span 2: XBUS-00/XPD-01 "Xorcom XPD [usb:X1061826].2: E1" HDB3
        span=2,2,0,cas,hdb3
        cas=32-46:1101
        cas=48-62:1101
        dchan=47
        echocanceller=oslec,32-46,48-62

        # Span 3: XBUS-01/XPD-00 "Xorcom XPD [usb:X1061392].1: FXS"
        fxoks=63
        echocanceller=oslec,63
        fxoks=64
        echocanceller=oslec,64
        fxoks=65
        echocanceller=oslec,65
        fxoks=66
        echocanceller=oslec,66
        fxoks=67
        echocanceller=oslec,67
        fxoks=68
        echocanceller=oslec,68
        fxoks=69
        echocanceller=oslec,69
        fxoks=70
        echocanceller=oslec,70
        # astbanktype: output
        fxoks=71
        echocanceller=oslec,71
        # astbanktype: output
        fxoks=72
        echocanceller=oslec,72
        # astbanktype: input
        fxoks=73
        echocanceller=oslec,73
        # astbanktype: input
        fxoks=74
        echocanceller=oslec,74
        # astbanktype: input
        fxoks=75
        echocanceller=oslec,75
        # astbanktype: input
        fxoks=76
        echocanceller=oslec,76

        # Span 4: XBUS-01/XPD-10 "Xorcom XPD [usb:X1061392].2: FXO"
        fxsks=77
        echocanceller=oslec,77
        fxsks=78
        echocanceller=oslec,78
        fxsks=79
        echocanceller=oslec,79
        fxsks=80
        echocanceller=oslec,80
        fxsks=81
        echocanceller=oslec,81
        fxsks=82
        echocanceller=oslec,82
        fxsks=83
        echocanceller=oslec,83
        fxsks=84
        echocanceller=oslec,84

        # Global data

        loadzone = us
        defaultzone = us

        chan_dahdi.conf
        [trunkgroups]

        [channels]
        context=from-pstn
        signalling=fxs_ks
        rxwink=300 ; Atlas seems to use long (250ms) winks
        usecallerid=yes
        hidecallerid=no
        callwaiting=yes
        usecallingpres=yes
        callwaitingcallerid=yes
        threewaycalling=yes
        transfer=yes
        canpark=yes
        cancallforward=yes
        callreturn=yes
        echocancel=yes
        echocancelwhenbridged=no
        faxdetect=incoming
        echotraining=800
        rxgain=0.0
        txgain=0.0
        callgroup=1
        pickupgroup=1

        ;Uncomment these lines if you have problems with the disconection of your analog lines
        ;busydetect=yes
        ;busycount=3


        immediate=no

        #include dahdi-channels.conf
        #include chan_dahdi_additional.conf

        dahdi-channels.conf
        ; Span 1: XBUS-00/XPD-00 "Xorcom XPD [usb:X1061826].1: E1" (MASTER) HDB3 ClockSource
        group=0,11
        context=from-dahdi
        ;switchtype = euroisdn
        signalling = mfcr2
        mfcr2_variant=itu
        ;mfcr2_dtmf_detection=0
        ;mfcr2_dtmf_dialing=0
        ;mfcr2_get_ani_first=yes
        ;mfcr2_immediate_accept=yes
        ;mfcr2_max_ani=10
        ;mfcr2_max_dnis=4
        mfcr2_category=national_subscriber
        mfcr2_logdir=cneuro
        mfcr2_logging=all
        ;mfcr2_mfback_timeout=-1
        mfcr2_call_files=yes
        channel => 1,32
        context = default
        group = 63



        ; Span 3: XBUS-01/XPD-00 "Xorcom XPD [usb:X1061392].1: FXS"
        ;;; line="63 XPP_FXS/01/00/0 FXOKS (In use) (EC: OSLEC - INACTIVE)"
        signalling=fxo_ks
        callerid="Channel 63" <4063>
        mailbox=4063
        group=5
        context=from-internal
        channel => 63
        callerid=
        mailbox=
        group=
        context=default

        ;;; line="64 XPP_FXS/01/00/1 FXOKS (In use) (EC: OSLEC - INACTIVE)"
        signalling=fxo_ks
        callerid="Channel 64" <4064>
        mailbox=4064
        group=5
        context=from-internal
        channel => 64
        callerid=
        mailbox=
        group=
        context=default

        ;;; line="65 XPP_FXS/01/00/2 FXOKS (In use) (EC: OSLEC - INACTIVE)"
        signalling=fxo_ks
        callerid="Channel 65" <4065>
        mailbox=4065
        group=5
        context=from-internal
        channel => 65
        callerid=
        mailbox=
        group=
        context=default

        ;;; line="66 XPP_FXS/01/00/3 FXOKS (In use) (EC: OSLEC - INACTIVE)"
        signalling=fxo_ks
        callerid="Channel 66" <4066>
        mailbox=4066
        group=5
        context=from-internal
        channel => 66
        callerid=
        mailbox=
        group=
        context=default

        ;;; line="67 XPP_FXS/01/00/4 FXOKS (In use) (EC: OSLEC - INACTIVE)"
        signalling=fxo_ks
        callerid="Channel 67" <4067>
        mailbox=4067
        group=5
        context=from-internal
        channel => 67
        callerid=
        mailbox=
        group=
        context=default

        ;;; line="68 XPP_FXS/01/00/5 FXOKS (In use) (EC: OSLEC - INACTIVE)"
        signalling=fxo_ks
        callerid="Channel 68" <4068>
        mailbox=4068
        group=5
        context=from-internal
        channel => 68
        callerid=
        mailbox=
        group=
        context=default

        ;;; line="69 XPP_FXS/01/00/6 FXOKS (In use) (EC: OSLEC - INACTIVE)"
        signalling=fxo_ks
        callerid="Channel 69" <4069>
        mailbox=4069
        group=5
        context=from-internal
        channel => 69
        callerid=
        mailbox=
        group=
        context=default

        ;;; line="70 XPP_FXS/01/00/7 FXOKS (In use) (EC: OSLEC - INACTIVE)"
        signalling=fxo_ks
        callerid="Channel 70" <4070>
        mailbox=4070
        group=5
        context=from-internal
        channel => 70
        callerid=
        mailbox=
        group=
        context=default

        ;;; line="71 XPP_OUT/01/00/8 FXOKS (In use) (EC: OSLEC - INACTIVE)"
        signalling=fxo_ks
        callerid="Channel 71" <4071>
        mailbox=4071
        group=
        context=astbank-output
        channel => 71
        callerid=
        mailbox=
        group=
        context=default

        ;;; line="72 XPP_OUT/01/00/9 FXOKS (In use) (EC: OSLEC - INACTIVE)"
        signalling=fxo_ks
        callerid="Channel 72" <4072>
        mailbox=4072
        group=
        context=astbank-output
        channel => 72
        callerid=
        mailbox=
        group=
        context=default

        ;;; line="73 XPP_IN/01/00/10 FXOKS (In use) (EC: OSLEC - INACTIVE)"
        signalling=fxo_ks
        callerid="Channel 73" <4073>
        mailbox=4073
        group=
        context=astbank-input
        immediate=yes
        channel => 73
        callerid=
        mailbox=
        group=
        context=default
        immediate=no

        ;;; line="74 XPP_IN/01/00/11 FXOKS (In use) (EC: OSLEC - INACTIVE)"
        signalling=fxo_ks
        callerid="Channel 74" <4074>
        mailbox=4074
        group=
        context=astbank-input
        immediate=yes
        channel => 74
        callerid=
        mailbox=
        group=
        context=default
        immediate=no

        ;;; line="75 XPP_IN/01/00/12 FXOKS (In use) (EC: OSLEC - INACTIVE)"
        signalling=fxo_ks
        callerid="Channel 75" <4075>
        mailbox=4075
        group=
        context=astbank-input
        immediate=yes
        channel => 75
        callerid=
        mailbox=
        group=
        context=default
        immediate=no

        ;;; line="76 XPP_IN/01/00/13 FXOKS (In use) (EC: OSLEC - INACTIVE)"
        signalling=fxo_ks
        callerid="Channel 76" <4076>
        mailbox=4076
        group=
        context=astbank-input
        immediate=yes
        channel => 76
        callerid=
        mailbox=
        group=
        context=default
        immediate=no


        ; Span 4: XBUS-01/XPD-10 "Xorcom XPD [usb:X1061392].2: FXO"
        ;;; line="77 XPP_FXO/01/10/0 FXSKS (In use) (EC: OSLEC - INACTIVE)"
        signalling=fxs_ks
        callerid=asreceived
        group=0
        context=from-pstn
        channel => 77
        callerid=
        group=
        context=default

        ;;; line="78 XPP_FXO/01/10/1 FXSKS (In use) (EC: OSLEC - INACTIVE)"
        signalling=fxs_ks
        callerid=asreceived
        group=0
        context=from-pstn
        channel => 78
        callerid=
        group=
        context=default

        ;;; line="79 XPP_FXO/01/10/2 FXSKS (In use) (EC: OSLEC - INACTIVE)"
        signalling=fxs_ks
        callerid=asreceived
        group=0
        context=from-pstn
        channel => 79
        callerid=
        group=
        context=default

        ;;; line="80 XPP_FXO/01/10/3 FXSKS (In use) (EC: OSLEC - INACTIVE)"
        signalling=fxs_ks
        callerid=asreceived
        group=0
        context=from-pstn
        channel => 80
        callerid=
        group=
        context=default

        ;;; line="81 XPP_FXO/01/10/4 FXSKS (In use) (EC: OSLEC - INACTIVE)"
        signalling=fxs_ks
        callerid=asreceived
        group=0
        context=from-pstn
        channel => 81
        callerid=
        group=
        context=default

        ;;; line="82 XPP_FXO/01/10/5 FXSKS (In use) (EC: OSLEC - INACTIVE)"
        signalling=fxs_ks
        callerid=asreceived
        group=0
        context=from-pstn
        channel => 82
        callerid=
        group=
        context=default

        ;;; line="83 XPP_FXO/01/10/6 FXSKS (In use) (EC: OSLEC - INACTIVE)"
        signalling=fxs_ks
        callerid=asreceived
        group=0
        context=from-pstn
        channel => 83
        callerid=
        group=
        context=default

        ;;; line="84 XPP_FXO/01/10/7 FXSKS (In use) (EC: OSLEC - INACTIVE)"
        signalling=fxs_ks
        callerid=asreceived
        group=0
        context=from-pstn
        channel => 84
        callerid=
        group=
        context=default

        Comentario

        • #5
          Disculpa pero en la configuración dahdi-channels.conf en la conf del E1 es:
          group=0,11
          context=from-dahdi
          ;switchtype = euroisdn
          signalling = mfcr2
          mfcr2_variant=itu
          ;mfcr2_dtmf_detection=0
          ;mfcr2_dtmf_dialing=0
          ;mfcr2_get_ani_first=yes
          ;mfcr2_immediate_accept=yes
          ;mfcr2_max_ani=10
          ;mfcr2_max_dnis=4
          mfcr2_category=national_subscriber
          mfcr2_logdir=cneuro
          mfcr2_logging=all
          ;mfcr2_mfback_timeout=-1
          mfcr2_call_files=yes
          channel => 1-15,17-31,32-46,48-62
          context = default
          group = 63


          Saludos

          Comentario

          • #6
            Si estás en México cambia el mfcr2_variant a mx en caso contrario configura conforme al país que corresponda y descomenta las siguientes líneas:

            mfcr2_variant=mx
            ;mfcr2_dtmf_detection=0
            ;mfcr2_dtmf_dialing=0
            mfcr2_get_ani_first=yes
            ;mfcr2_immediate_accept=yes
            mfcr2_max_ani=10
            mfcr2_max_dnis=4
            mfcr2_category=national_subscriber
            mfcr2_logdir=cneuro
            mfcr2_logging=all
            mfcr2_mfback_timeout=-1

            Y agrega

            mfcr2_metering_pulse_timeout=-1
            mfcr2_forced_release=no

            Reinicia DAHDI y prueba.

            Saludos
            IT Specialist

            Comentario

            Anterior template Próximo

            Nube de Etiquetas

            Colapsar
            alestra  asterisk  asterisk 1.8  centos  cisco  dahdi  dialplan  elastix  elastix 2.4  freepbx  goautodial  iax  ivr  llamadas  php  pstn  sangoma  telmex  troncal  voip 

            Principales Usuarios Activos

            Colapsar
            No hay usuarios activos superiores.
            Trabajando...
            X