Cursos Asterisk en México

Problemas al llamar

Colapsar

Anuncio

Colapsar
No hay anuncio todavía.
X
Colapsar
 
  • Página de 1
  • Filtrar
  • Tiempo
  • Mostrar
Limpiar Todo
nuevos mensajes
Anterior template Próximo
  • #1

    Problemas al llamar

    Buenas tardes.

    mi problema es que cuando llamo a algun telefono mi softphone hace un ruido cuando se empiesa a llamar al numero y cuando cuelgo el telefono mi softphone marca ocupado el ejemplo lo pongo a continuacion.

    debug Asterisk -r -----------------------------------------------------------------------------------------------------

    -- Called DAHDI/g1/0444771218703
    MFC/R2 call has been accepted on forward channel 1
    -----------------------------------------------------------------------------------------------------------------
    -- DAHDI/1-1 is ringing
    -- DAHDI/1-1 is making progress passing it to SIP/011-00000000

    //Cuando se pone en estado ring en el softphone hace un ruido raro y no detecta el answer y cuando cuelgo el softphone da el tono de ocupado y en el debug se ve que no detecta.//
    -----------------------------------------------------------------------------------------------------------------
    -- Hungup 'DAHDI/1-1'

    despues de esto checo mi debug y me da esto:

    [Nov 20 12:22:02] DEBUG[15641] chan_dahdi.c: Chan 1 - Requested to make call (ANI=(restricted), DNIS=0444771218703, category=National Priority Subscriber)
    [Nov 20 12:22:02] DEBUG[15641] chan_dahdi.c: Chan 1 - Call started at Tue Nov 20 12:22:02 2012 on chan 1 [openr2 version 1.3.1, revision (release)]
    [Nov 20 12:22:02] DEBUG[15641] chan_dahdi.c: Chan 1 - Outgoing call proceeding: ANI=(restricted), DNIS=0444771218703, Category=National Priority Subscriber
    [Nov 20 12:22:02] DEBUG[15641] chan_dahdi.c: Chan 1 - CAS Tx >> [SEIZE] 0x00
    [Nov 20 12:22:02] DEBUG[15641] chan_dahdi.c: Chan 1 - CAS Raw Tx >> 0x01
    [Nov 20 12:22:02] DEBUG[15641] chan_dahdi.c: bits changed in chan 1
    [Nov 20 12:22:02] DEBUG[15641] chan_dahdi.c: Chan 1 - Bits changed from 0x08 to 0x0C
    [Nov 20 12:22:02] DEBUG[15641] chan_dahdi.c: Chan 1 - CAS Rx << [SEIZE ACK] 0x0C
    [Nov 20 12:22:02] DEBUG[15641] chan_dahdi.c: Chan 1 - MFC/R2 call acknowledge!
    [Nov 20 12:22:02] DEBUG[15641] chan_dahdi.c: Chan 1 - Sending DNIS digit 0
    [Nov 20 12:22:02] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 0 [ON]
    [Nov 20 12:22:02] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 1 [ON]
    [Nov 20 12:22:02] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 0 [OFF]
    [Nov 20 12:22:02] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 1 [OFF]
    [Nov 20 12:22:02] DEBUG[15641] chan_dahdi.c: Chan 1 - Sending DNIS digit 4
    [Nov 20 12:22:02] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 4 [ON]
    [Nov 20 12:22:02] DEBUG[15641] chan_dahdi.c: Chan 1 - Group A DNIS request handled
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 1 [ON]
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 4 [OFF]
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 1 [OFF]
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - Sending DNIS digit 4
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 4 [ON]
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - Group A DNIS request handled
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 1 [ON]
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 4 [OFF]
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 1 [OFF]
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - Sending DNIS digit 4
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 4 [ON]
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - Group A DNIS request handled
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 1 [ON]
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 4 [OFF]
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 1 [OFF]
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - Sending DNIS digit 7
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 7 [ON]
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - Group A DNIS request handled
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 1 [ON]
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 7 [OFF]
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 1 [OFF]
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - Sending DNIS digit 7
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 7 [ON]
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - Group A DNIS request handled
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 1 [ON]
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 7 [OFF]
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 1 [OFF]
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - Sending DNIS digit 1
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 1 [ON]
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - Group A DNIS request handled
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 1 [ON]
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 1 [OFF]
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 1 [OFF]
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - Sending DNIS digit 2
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 2 [ON]
    [Nov 20 12:22:03] DEBUG[15641] chan_dahdi.c: Chan 1 - Group A DNIS request handled
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 1 [ON]
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 2 [OFF]
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 1 [OFF]
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - Sending DNIS digit 1
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 1 [ON]
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - Group A DNIS request handled
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 1 [ON]
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 1 [OFF]
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 1 [OFF]
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - Sending DNIS digit 8
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 8 [ON]
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - Group A DNIS request handled
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 1 [ON]
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 8 [OFF]
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 1 [OFF]
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - Sending DNIS digit 7
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 7 [ON]
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - Group A DNIS request handled
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 1 [ON]
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 7 [OFF]
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 1 [OFF]
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - Sending DNIS digit 0
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 0 [ON]
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - Group A DNIS request handled
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 1 [ON]
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 0 [OFF]
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 1 [OFF]
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - Sending DNIS digit 3
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 3 [ON]
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - Group A DNIS request handled
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 3 [ON]
    [Nov 20 12:22:04] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 3 [OFF]
    [Nov 20 12:22:05] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 3 [OFF]
    [Nov 20 12:22:05] DEBUG[15641] chan_dahdi.c: Chan 1 - Sending category National Priority Subscriber
    [Nov 20 12:22:05] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 2 [ON]
    [Nov 20 12:22:07] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 1 [ON]
    [Nov 20 12:22:07] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Tx >> 2 [OFF]
    [Nov 20 12:22:11] DEBUG[15641] chan_dahdi.c: Chan 1 - MF Rx << 1 [OFF]
    [Nov 20 12:22:11] DEBUG[15641] chan_dahdi.c: Enqueuing progress frame after R2 accept in chan 1
    [Nov 20 12:22:54] DEBUG[15641] chan_dahdi.c: disconnecting MFC/R2 call on chan 1
    [Nov 20 12:22:54] DEBUG[15641] chan_dahdi.c: ast cause 0 resulted in openr2 cause 6/Normal Clearing
    [Nov 20 12:22:54] DEBUG[15641] chan_dahdi.c: Chan 1 - CAS Tx >> [CLEAR FORWARD] 0x08
    [Nov 20 12:22:54] DEBUG[15641] chan_dahdi.c: Chan 1 - CAS Raw Tx >> 0x09
    [Nov 20 12:22:54] DEBUG[15591] chan_dahdi.c: Chan 1 - Bits changed from 0x0C to 0x08
    [Nov 20 12:22:54] DEBUG[15591] chan_dahdi.c: Chan 1 - CAS Rx << [IDLE] 0x08
    [Nov 20 12:22:54] DEBUG[15591] chan_dahdi.c: Chan 1 - Call ended
    [Nov 20 12:22:54] DEBUG[15591] chan_dahdi.c: Chan 1 - CAS Tx >> [IDLE] 0x08
    [Nov 20 12:22:54] DEBUG[15591] chan_dahdi.c: Chan 1 - CAS Raw Tx >> 0x09

    En este debug veo que no a detectado en answer. no se si nesecito otra configuracion.

    Saludos.
    Etiquetas: Ninguno
  • #2
    que tienes en tu chan_dahdi.conf al respecto de este canal?
    dCAP Christian Cabrera R.
    Para aprender a usar Asterisk, asiste a uno de mis cursos Asterisk
    Si deseas asesoría pagada, por favor contáctame

    Comentario

    • #3
      Hola Christian
      En mi chan_dahdi tengo esto:

      [trunkgroups]

      [channels]

      context=default
      usecallerid=yes
      hidecallerid=no
      callwaiting=yes
      usecallingpres=yes
      callwaitingcallerid=yes
      threewaycalling=yes
      transfer=yes
      canpark=yes
      cancallforward=yes
      callreturn=yes
      echocancel=yes
      echocancelwhenbridged=yes
      relaxdtmf=yes
      rxgain=0.0
      txgain=0.0
      group=1
      callgroup=1
      pickupgroup=1
      immediate=no

      ;Sangoma A101 port 1 [slot:4 bus:2 span:1] <wanpipe1>
      ;switchtype=euroisdn
      context=from-pstn
      group=1
      ;echocancel=yes
      signalling=mfcr2
      mfcr2_variant=mx
      mfcr2_get_ani_first=no
      mfcr2_max_ani=10
      mfcr2_max_dnis=4
      mfcr2_category=national_subscriber
      mfcr2_call_files=yes
      mfcr2_mfback_timeout=-1
      mfcr2_metering_pulse_timeout=-1
      ; this is for debugging purposes
      mfcr2_logdir=span1
      mfcr2_logging=all
      ; end debugging configuration
      restrictcid=yes
      hidecallerid=yes
      channel => 1-15
      channel => 17-21

      Comentario

      • #4
        Eso no se ve mal, qué hay en tu wanpipe1.conf?
        IT Specialist

        Comentario

        • #5
          Hola Marco en mi wanpipe1 tengo esto

          [devices]
          wanpipe1 = WAN_AFT_TE1, Comment

          [interfaces]
          w1g1 = wanpipe1, , TDM_VOICE, Comment

          [wanpipe1]
          CARD_TYPE = AFT
          S514CPU = A
          CommPort = PRI
          AUTO_PCISLOT = NO
          PCISLOT = 4
          PCIBUS = 2
          FE_MEDIA = E1
          FE_LCODE = HDB3
          FE_FRAME = NCRC4
          FE_LINE = 1
          TE_CLOCK = NORMAL
          TE_REF_CLOCK = 0
          TE_SIG_MODE = CAS
          TE_HIGHIMPEDANCE = NO
          TE_RX_SLEVEL = 430
          HW_RJ45_PORT_MAP = DEFAULT
          LBO = 120OH
          FE_TXTRISTATE = NO
          MTU = 1500
          UDPPORT = 9000
          TTL = 255
          IGNORE_FRONT_END = NO
          TDMV_SPAN = 1
          TDMV_DCHAN = 16
          TE_AIS_MAINTENANCE = NO #NO: defualt YES: Start port in AIS Blue Alarm and keep line down
          #wanpipemon -i w1g1 -c Ttx_ais_off to disable AIS maintenance mode
          #wanpipemon -i w1g1 -c Ttx_ais_on to enable AIS maintenance mode
          TDMV_HW_DTMF = NO # YES: receive dtmf events from hardware
          TDMV_HW_FAX_DETECT = NO # YES: receive fax 1100hz events from hardware
          HWEC_OPERATION_MODE = OCT_NORMAL # OCT_NORMAL: echo cancelation enabled with nlp (default)
          # OCT_SPEECH: improves software tone detection by disabling NLP (echo possible)
          # OCT_NO_ECHO:disables echo cancelation but allows VQE/tone functions.
          HWEC_DTMF_REMOVAL = NO # NO: default YES: remove dtmf out of incoming media (must have hwdtmf enabled)
          HWEC_NOISE_REDUCTION = NO # NO: default YES: reduces noise on the line - could break fax
          HWEC_ACUSTIC_ECHO = NO # NO: default YES: enables acustic echo cancelation
          HWEC_NLP_DISABLE = NO # NO: default YES: guarantees software tone detection (possible echo)
          HWEC_TX_AUTO_GAIN = 0 # 0: disable -40-0: default tx audio level to be maintained (-20 default)
          HWEC_RX_AUTO_GAIN = 0 # 0: disable -40-0: default tx audio level to be maintained (-20 default)
          HWEC_TX_GAIN = 0 # 0: disable -24-24: db values to be applied to tx signal
          HWEC_RX_GAIN = 0 # 0: disable -24-24: db values to be applied to tx signal

          [w1g1]
          ACTIVE_CH = ALL
          TDMV_HWEC = NO
          MTU = 8


          de aqui he hecho cambio en TE_RX_SLEVEL por 120 pero sigue el problema.
          Saludos.

          Comentario

          • #6
            Si, justo quería revisar el nivel de TE_RX_SLEVEL, cómo está el system.conf de dahdi?
            IT Specialist

            Comentario

            • #7
              Yo probaría cambiar el RX_SLEVEL a 120 y recargando wanrouter
              dCAP Christian Cabrera R.
              Para aprender a usar Asterisk, asiste a uno de mis cursos Asterisk
              Si deseas asesoría pagada, por favor contáctame

              Comentario

              • #8
                Hola Christian.
                Ya cambie el valor del RX_SLEVEL y reinicie el wanrouter y el asterisk pero sigue igual me hace lo mismo cuando llamo.


                Hola Marco.

                Mira mi archivo system.conf es este:

                loadzone=mx

                defaultzone=mx


                #Sangoma A101 port 1 [slot:4 bus:2 span:1] <wanpipe1>

                span=1,1,0,cas,hdb3

                cas=1-15:1101

                hardhdlc=16

                cas=17-21:1101

                echocanceller=mg2,1-15,17-21


                Saludos.

                Comentario

                Anterior template Próximo

                Nube de Etiquetas

                Colapsar
                alestra  asterisk  asterisk 1.8  centos  cisco  dahdi  dialplan  elastix  elastix 2.4  freepbx  goautodial  iax  ivr  llamadas  php  pstn  sangoma  telmex  troncal  voip 

                Principales Usuarios Activos

                Colapsar
                No hay usuarios activos superiores.
                Trabajando...
                X