Hola a todos,

Me ha surgido un nuevo proyecto con asterisk.
El caso es que tengo que remplazar las centralitas existentes en una empresa que tiene una delegación.

Estas dos sedes de la empresa, tienen un tunel tirado medianto dos routers CIsco, que permiten llamar de una sede a otra marcando una extension. Para esto, uno de los puertos RDSI del router Cisco, esta conectada a al centralita existente (la que se va a remplazar).

Hemos probado a enchufar directamente un puerto CAPI de nuestro Asterisk, con el puerto RDSI por el que el router recibe las ordenes de la
centralita. Hemos marcado una extension (ext. 263) y no ha funcinado, hemos recibido el siguiente error en el Asterisk. Al ver que no funcionaba, hemos probado con todos los puertos CAPI de Asterisk con el mismo resultado.

Cualquier ayuda sera bien recibida.

Connected to Asterisk 1.0.3 currently running on Asterisk-OKM (pid = 991)

Verbosity is atleast 3

-- Remote UNIX connection

-- Executing ChanIsAvail("SIP/112-8c2e", "CAPI/916741111&CAPI/916741111&CAPI/914850127&CAPI/914850127") in new stack

-- data = 916741111

-- capi request omsn = 916741111

== found capi with omsn = 916741111

-- Executing SetVar("SIP/112-8c2e", "CANAL=916741111") in new stack

-- Executing Dial("SIP/112-8c2e", "CAPI/916741111:263|70|Tt") in new stack

-- data = 916741111:263

-- capi request omsn = 916741111

== found capi with omsn = 916741111

== CAPI Call CAPI[contr2/916741111]/59 -- Called 916741111:263

-- CONNECT_CONF ID=001 #0x0026 LEN=0014

Controller/PLCI/NCCI = 0x102

Info = 0x0

== received CONNECT_CONF PLCI = 0x102 INFO = 0

-- DISCONNECT_IND ID=001 #0x001b LEN=0014

Controller/PLCI/NCCI = 0x102

Reason = 0x3301

== DISCONNECT_IND PLCI=0x102 REASON=0x3301

== No one is available to answer at this time

Apr 18 16:56:59 WARNING: pbx.c:1934 ast_pbx_run: Timeout, but no rule 't' in context 'default'

-- Executing ChanIsAvail("SIP/112-ef31", "CAPI/916741111&CAPI/916741111&CAPI/914850127&CAPI/914850127") in new stack

-- data = 916741111

-- capi request omsn = 916741111

== found capi with omsn = 916741111

-- Executing SetVar("SIP/112-ef31", "CANAL=916741111") in new stack

-- Executing Dial("SIP/112-ef31", "CAPI/916741111:263|70|Tt") in new stack

-- data = 916741111:263

-- capi request omsn = 916741111

== found capi with omsn = 916741111

== CAPI Call CAPI[contr2/916741111]/61 -- Called 916741111:263

-- CONNECT_CONF ID=001 #0x0027 LEN=0014

Controller/PLCI/NCCI = 0x102

Info = 0x0

== received CONNECT_CONF PLCI = 0x102 INFO = 0

-- DISCONNECT_IND ID=001 #0x001c LEN=0014

Controller/PLCI/NCCI = 0x102

Reason = 0x3301

== DISCONNECT_IND PLCI=0x102 REASON=0x3301

== No one is available to answer at this time

-- Executing ChanIsAvail("SIP/112-11cd", "CAPI/916741111&CAPI/916741111&CAPI/914850127&CAPI/914850127") in new stack

-- data = 916741111

-- capi request omsn = 916741111

== found capi with omsn = 916741111

-- Executing SetVar("SIP/112-11cd", "CANAL=916741111") in new stack

-- Executing Dial("SIP/112-11cd", "CAPI/916741111:263|70|Tt") in new stack

-- data = 916741111:263

-- capi request omsn = 916741111

== found capi with omsn = 916741111

== CAPI Call CAPI[contr2/916741111]/63 -- Called 916741111:263

-- CONNECT_CONF ID=001 #0x0028 LEN=0014

Controller/PLCI/NCCI = 0x102

Info = 0x0

== received CONNECT_CONF PLCI = 0x102 INFO = 0

-- DISCONNECT_IND ID=001 #0x001d LEN=0014

Controller/PLCI/NCCI = 0x102

Reason = 0x3301

== DISCONNECT_IND PLCI=0x102 REASON=0x3301

== No one is available to answer at this time

-- Executing ChanIsAvail("SIP/112-64b2", "CAPI/916741111&CAPI/916741111&CAPI/914850127&CAPI/914850127") in new stack

-- data = 916741111

-- capi request omsn = 916741111

== found capi with omsn = 916741111

-- Executing SetVar("SIP/112-64b2", "CANAL=916741111") in new stack

-- Executing Dial("SIP/112-64b2", "CAPI/916741111:263|70|Tt") in new stack

-- data = 916741111:263

-- capi request omsn = 916741111

== found capi with omsn = 916741111

== CAPI Call CAPI[contr2/916741111]/65 -- Called 916741111:263

-- CONNECT_CONF ID=001 #0x0029 LEN=0014

Controller/PLCI/NCCI = 0x102

Info = 0x0

== received CONNECT_CONF PLCI = 0x102 INFO = 0

-- DISCONNECT_IND ID=001 #0x001e LEN=0014

Controller/PLCI/NCCI = 0x102

Reason = 0x3301

== DISCONNECT_IND PLCI=0x102 REASON=0x3301

== No one is available to answer at this time

Asterisk-OKM*CLI>

Gracias por vuestro tiempo.

Ismael.