Hola Amigos :

Tengo este inconveniente y no se como se soluciona
Por favor ayudenme.. (ya deshabilite de la bios todo los usb).

Mi problema es que no puedo realizar ni recibir llamadas por mi tarjeta fxo x100p.

Cuando ejecuto genzaptelconf -s -d mi salida es :


Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg

cuando ejecuto lsmod mi salida es:


Module                  Size  Used by    Not tainted
wcusb                  19520   0  (unused)
usbcore                77376   0  [wcusb]
wcfxo                   9216   1
zaptel                178560   6  [wcusb wcfxo]
autofs4                15928   0  (autoclean) (unused)
audit                  89816   3
8139too                17384   1
mii                     3956   0  [8139too]
crc32                   3712   0  [8139too]
floppy                 56656   0  (autoclean)
sg                     36204   0  (autoclean) (unused)
scsi_mod              106408   1  (autoclean) [sg]
microcode               5688   0  (autoclean)
ext3                   85736   2
jbd                    50604   2  [ext3]

cuando ejecuto cat /proc/interrupts



          CPU0
  0:     232736          XT-PIC  timer
  1:          2          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  4:          3          XT-PIC  serial
  8:          1          XT-PIC  rtc
  9:    2281971          XT-PIC  wcfxo
 11:       4322          XT-PIC  eth0
 14:       8068          XT-PIC  ide0
 15:          0          XT-PIC  ide1
NMI:          0
ERR:      19526

borro el modulo usb asi :
rmmod wcusb y rmmod usbcore


[root@asterisk1 log]# lsmod
Module                  Size  Used by    Not tainted
wcfxo                   9216   1
zaptel                178560   6  [wcfxo]
autofs4                15928   0  (autoclean) (unused)
audit                  89816   3
8139too                17384   1
mii                     3956   0  [8139too]
crc32                   3712   0  [8139too]
floppy                 56656   0  (autoclean)
sg                     36204   0  (autoclean) (unused)
scsi_mod              106408   1  (autoclean) [sg]
microcode               5688   0  (autoclean)
ext3                   85736   2
jbd                    50604   2  [ext3]

En el directorio /usr/src/zaptel tengo con comentario el ztdummy

MODULES=zaptel tor2 torisa wcusb wcfxo wcfxs \
ztdynamic ztd-eth wct1xxp wct4xxp # ztdummy

En el archivo /etc/modules.conf tengo comentariados los modulos usb


#alias usb-controller usb-ohci
options torisa base=0xd0000
alias char-major-196 torisa
post-install tor2 /sbin/ztcfg
#post-install wcusb /sbin/ztcfg
post-install wcfxo /sbin/ztcfg
post-install ztdynamic /sbin/ztcfg
post-install ztd-eth /sbin/ztcfg
post-install wct1xxp /sbin/ztcfg
post-install wct4xxp /sbin/ztcfg
post-install wcte11xp /sbin/ztcfg
#post-install ztdummy /sbin/ztcfg
alias wctdm wcfxs
alias eth0 8139too
post-install torisa /sbin/ztcfg
post-install wcfxs /sbin/ztcfg

Caundo ejecuto dmesg obtengo:



dmesg
Linux version 2.4.21-27.0.1.EL (centos@centos-build) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-42)) #1 Fri Dec 24 02:04:03 GMT 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000b7f0000 (usable)
 BIOS-e820: 000000000b7f0000 - 000000000b7f8000 (ACPI data)
 BIOS-e820: 000000000b7f8000 - 000000000b800000 (ACPI NVS)
 BIOS-e820: 00000000ffef0000 - 00000000fff00000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
183MB LOWMEM available.
NX protection not present; using segment protection
On node 0 totalpages: 47088
zone(0): 4096 pages.
zone(1): 42992 pages.
zone(2): 0 pages.
Kernel command line: ro root=LABEL=/
Initializing CPU#0
Detected 935.462 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1867.77 BogoMIPS
Page-cache hash table entries: 65536 (order: 6, 256 KB)
Page-pin hash table entries: 16384 (order: 4, 64 KB)
Dentry cache hash table entries: 32768 (order: 6, 256 KB)
spurious 8259A interrupt: IRQ7.
Inode cache hash table entries: 16384 (order: 5, 128 KB)
Buffer cache hash table entries: 16384 (order: 4, 64 KB)
Memory: 179648k/188352k available (1539k kernel code, 6848k reserved, 1067k data, 164k init, 0k highmem)
zapping low mappings.
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU:             Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
Process timing init...done.
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd9f8, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router SIS [1039/0008] at 00:01.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Total HugeTLB memory allocated, 0
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
aio_setup: num_physpages = 11772
aio_setup: sizeof(struct page) = 56
Hugetlbfs mounted.
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 256 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:00.1
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SiS630    ATA 66 controller
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALLlct20 20, ATA DISK drive
blk: queue c0418500, I/O limit 4095Mb (mask 0xffffffff)
hdd: ATAPI CDROM 48X, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 39876480 sectors (20417 MB) w/418KiB Cache, CHS=2482/255/63, UDMA(33)
ide-floppy driver 0.99.newide
Partition check:
 hda: hda1 hda2 hda3
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
Initializing IPsec netlink socket
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 161k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 164k freed
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
Adding Swap: 779144k swap-space (priority -1)
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
IA-32 Microcode Update Driver: v1.13 <tigran@veritas.com>
microcode: CPU0 updated from revision 0xc to 0x13, date = 02062001
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
SCSI subsystem driver Revision: 1.00
inserting floppy driver for 2.4.21-27.0.1.EL
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 11 for device 00:09.0
divert: allocating divert_blk for eth0
eth0: RealTek RTL8139 Fast Ethernet at 0xcc0e9f00, 00:e0:7d:b3:de:15, IRQ 11
eth0:  Identified 8139 chip type 'RTL-8139C'
divert: freeing divert_blk for eth0
Zapata Telephony Interface Registered on major 196
Specify address with base=0xNNNNN
Registered Tormenta2 PCI
PCI: Found IRQ 9 for device 00:0b.0
wcfxo: DAA mode is 'FCC'
Found a Wildcard FXO: Generic Clone
Registered tone zone 0 (United States / North America)
ip_tables: (C) 2000-2002 Netfilter core team
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 11 for device 00:09.0
divert: allocating divert_blk for eth0
eth0: RealTek RTL8139 Fast Ethernet at 0xcc136f00, 00:e0:7d:b3:de:15, IRQ 11
eth0:  Identified 8139 chip type 'RTL-8139C'
ip_tables: (C) 2000-2002 Netfilter core team
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
audit subsystem ver 0.1 initialized
Audit daemon registered (process 747)
Freed a Wildcard
Zapata Telephony Interface Unloaded
Zapata Telephony Interface Registered on major 196
PCI: Found IRQ 9 for device 00:0b.0
wcfxo: DAA mode is 'FCC'
Found a Wildcard FXO: Generic Clone
Registered tone zone 0 (United States / North America)
Registered Tormenta2 PCI
No ISA tormenta card found at d0000
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver wcusb
Wildcard USB FXS Interface driver registered
Registered tone zone 0 (United States / North America)
usb.c: deregistering driver wcusb
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
Freed a Wildcard
Zapata Telephony Interface Unloaded
Zapata Telephony Interface Registered on major 196
PCI: Found IRQ 9 for device 00:0b.0
wcfxo: DAA mode is 'FCC'
Found a Wildcard FXO: Generic Clone
Registered tone zone 0 (United States / North America)
Registered Tormenta2 PCI
No ISA tormenta card found at d0000
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver wcusb
Wildcard USB FXS Interface driver registered
Registered tone zone 0 (United States / North America)
usb.c: deregistering driver wcusb
Registered tone zone 0 (United States / North America)
Freed a Wildcard
Zapata Telephony Interface Unloaded
Zapata Telephony Interface Registered on major 196
PCI: Found IRQ 9 for device 00:0b.0
wcfxo: DAA mode is 'FCC'
Found a Wildcard FXO: Generic Clone
Registered tone zone 0 (United States / North America)
Registered Tormenta2 PCI
No ISA tormenta card found at d0000
usb.c: registered new driver wcusb
Wildcard USB FXS Interface driver registered
Registered tone zone 0 (United States / North America)
Freed a Wildcard
usb.c: deregistering driver wcusb
Zapata Telephony Interface Unloaded
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
Zapata Telephony Interface Registered on major 196
PCI: Found IRQ 9 for device 00:0b.0
wcfxo: DAA mode is 'FCC'
Found a Wildcard FXO: Generic Clone
Registered tone zone 0 (United States / North America)
Registered Tormenta2 PCI
No ISA tormenta card found at d0000
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver wcusb
Wildcard USB FXS Interface driver registered
Registered tone zone 0 (United States / North America)
usb.c: deregistering driver wcusb
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
Freed a Wildcard
Zapata Telephony Interface Unloaded
Zapata Telephony Interface Registered on major 196
PCI: Found IRQ 9 for device 00:0b.0
wcfxo: DAA mode is 'FCC'
Found a Wildcard FXO: Generic Clone
Registered tone zone 0 (United States / North America)
Registered Tormenta2 PCI
No ISA tormenta card found at d0000
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver wcusb
Wildcard USB FXS Interface driver registered
Registered tone zone 0 (United States / North America)
usb.c: deregistering driver wcusb
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected

Como puedo solucionar este inconveniente?
por favor ayudenme ...cualquier sugerencia es bienvenida