Configurar asterisk con cisco 2801

Fernando

Buenas tardes, tengo un par de semanas intentado conectar mi asterisk con un router cisco 2801, el cual tiene 2 FXO y 4 FXS, la idea es que pueda marcar desde mi softphone, telefono voip al conmutador de otra empresa, este conmutador esta conectado los FXS, por lo tanto dentro de mi WAN estoy en el segmento 192.169.10.118 con un softphone, el asterisk esta en el 192.169.1.100, y el cisco esta en 192.169.5.1, por lo tanto en mi asterisk veo que estoy conectado sin problema con mi softphone, e incluso tengo otro conmutador pero con un ATA en el segmento de mi mismo softphone 192.168.10.200 y funciona si problema de donde me conecte, pero si deseo hacerlo al cisco 2801 donde esta el conmutador conectado a los FXS no he podido, configure en mi asterisk mi numero ejemplo 1001, esto en sip.conf y en extension.conf, canal y extension respectivamente, en cisco 2801 tengo esto:
[Parte de definicion de protocolo sip]
voice call send-alert
voice rtp send-recv
!
voice service pots
!
voice service voip
fax protocol cisco
sip
!
!
!
voice class codec 1
codec preference 1 g711ulaw
!

[aqui defino el puerto]

voice-port 0/0/1
mwi
timeouts call-disconnect 5
station-id name 1001
station-id number 1001
caller-id enable

[defino post]
dial-peer voice 1001 pots
description Binds to FXS Port 0/0/1
destination-pattern 1001
port 0/0/1
authentication username 1001 password 7 232039dodo898

gateway
timer receive-rtp 1200
!
sip-ua
authentication username cisco password 7 02050D4808095E731F
retry invite 3
retry response 3
retry bye 3
retry cancel 3
timers trying 1000
mwi-server ipv4:10.74.210.144 expires 3600 port 5060 transport udp
registrar ipv4:10.74.210.144:5060 expires 3600
sip-server ipv4:10.74.210.144:5060
!
!

Espero alguien me pueda decir donde puedo documentarme mas al respecto porque ya me canse 🙂
gracia por su atención.

Marco_Zink

Re: Configurar asterisk con cisco 2801

Hola Fernando,

No me quedó muy claro lo de las ip, sin embargo hay un detalle en la configuración:

mwi-server ipv4:10.74.210.144 expires 3600 port 5060 transport udp
registrar ipv4:10.74.210.144:5060 expires 3600
sip-server ipv4:10.74.210.144:5060

Estos parámetros deberían apuntar hacia tu Asterisk, que por lo que veo está en 192.169.1.100 y el cisco está tratando de registrarse hacia la 10.74.210.144, los puertos y protocolos están bien, pero checa ese dato.

Marco_Zink

Re: Configurar asterisk con cisco 2801

Y no olvides asegurarte que el Cisco y el Asterisk se vean mutuamente.

Fernando

Re: Configurar asterisk con cisco 2801

Muchas gracias por la atención.
Perdon tienes toda la razón, es que lo copie de otras pruebas que estoy haciendo, pero si es correcto como lo viste, debe apuntar al 192.169.1.100.
ahora te comento que ayer tarde encontre unos detalles con el firewall de asterisk, habilite puerto RTP y con esto me permitio conectarlo, es decir, en asterisk veo que tanto como la extensión como la troncal ya se "ven" y en el cisco con el comando sh sip-au registre status me indica que es registrado:
Asterisk:
Name/username Host Dyn Forcerport ACL Port Status
1001/1001 187.173.95.230 D A 5060 OK (53 ms)
118/118 192.168.10.118 D A 5060 OK (11 ms)
2243/2243 192.168.10.200 D N A 5060 OK (23 ms)
troncal/cisco 192.169.5.1 N 5060 OK (51 ms)

en router:

cisco2801#sh sip-ua register status
Line peer expires(sec) registered
================================ ========== ============ ==========
1001 1001 1710 yes

ahora como te daras cuenta en la extensión me da otra ip, esta es la ip de mi WAN y no de mi interfas FA0/0 que es la que conecta al switch, en donde dice troncal esa es mi ip de la interfas FA0/0. En la primera como esta configurado como dynamic me asigna esa ip, y también me pasa que se desconectan en cierto tiempo y tengo que restart la iptable para que se conecte, pero ya conectada llamo a la extensión y no me contesta y en asterisk me presenta este mensaje, y estoy trabajando en ello:

== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Executing [1001@from-internal:1] Set("SIP/118-00000039", "RINGTIMER=15") in new stack
-- Executing [1001@from-internal:2] Macro("SIP/118-00000039", "exten-vm,novm,1001,0,0,0") in new stack
-- Executing [s@macro-exten-vm:1] Macro("SIP/118-00000039", "user-callerid,") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/118-00000039", "AMPUSER=118") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/118-00000039", "0?report") in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("SIP/118-00000039", "1?Set(REALCALLERIDNUM=118)") in new stack
-- Executing [s@macro-user-callerid:4] Set("SIP/118-00000039", "AMPUSER=118") in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/118-00000039", "AMPUSERCIDNAME=fgerardo") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("SIP/118-00000039", "0?report") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/118-00000039", "AMPUSERCID=118") in new stack
-- Executing [s@macro-user-callerid:8] Set("SIP/118-00000039", "CALLERID(all)="fgerardo" <118>") in new stack
-- Executing [s@macro-user-callerid:9] GotoIf("SIP/118-00000039", "0?limit") in new stack
-- Executing [s@macro-user-callerid:10] ExecIf("SIP/118-00000039", "0?Set(GROUP(concurrency_limit)=118)") in new stack
-- Executing [s@macro-user-callerid:11] GosubIf("SIP/118-00000039", "7?sub-ccss,s,1(macro-exten-vm,1001)") in new stack
-- Executing [s@sub-ccss:1] ExecIf("SIP/118-00000039", "0?Return()") in new stack
-- Executing [s@sub-ccss:2] Set("SIP/118-00000039", "CCSS_SETUP=TRUE") in new stack
-- Executing [s@sub-ccss:3] GosubIf("SIP/118-00000039", "0?monitor_config,1(macro-exten-vm,1001):monitor_default,1(macro-exten-vm,1001)") in new stack
-- Executing [monitor_default@sub-ccss:1] GotoIf("SIP/118-00000039", "1?is_exten") in new stack
-- Goto (sub-ccss,monitor_default,4)
-- Executing [monitor_default@sub-ccss:4] Set("SIP/118-00000039", "CALLCOMPLETION(cc_monitor_policy)=generic") in new stack
-- Executing [monitor_default@sub-ccss:5] Set("SIP/118-00000039", "CALLCOMPLETION(cc_max_monitors)=5") in new stack
-- Executing [monitor_default@sub-ccss:6] Return("SIP/118-00000039", "TRUE") in new stack
-- Executing [s@sub-ccss:4] GosubIf("SIP/118-00000039", "7?agent_config,1():agent_default,1()") in new stack
-- Executing [agent_config@sub-ccss:1] Set("SIP/118-00000039", "CALLCOMPLETION(cc_agent_policy)=generic") in new stack
-- Executing [agent_config@sub-ccss:2] Set("SIP/118-00000039", "CALLCOMPLETION(cc_offer_timer)=30") in new stack
-- Executing [agent_config@sub-ccss:3] Set("SIP/118-00000039", "CALLCOMPLETION(ccbs_available_timer)=") in new stack
[2012-09-27 09:45:00] WARNING: ccss.c:931 ast_set_ccbs_available_timer: 0 is an invalid value for ccbs_available_timer. Retaining value as 4800
-- Executing [agent_config@sub-ccss:4] Set("SIP/118-00000039", "CALLCOMPLETION(ccnr_available_timer)=") in new stack
[2012-09-27 09:45:00] WARNING: ccss.c:901 ast_set_ccnr_available_timer: 0 is an invalid value for ccnr_available_timer. Retaining value as 7200
-- Executing [agent_config@sub-ccss:5] Set("SIP/118-00000039", "CALLCOMPLETION(cc_callback_macro)=ccss-default") in new stack
-- Executing [agent_config@sub-ccss:6] ExecIf("SIP/118-00000039", "1?Set(CALLCOMPLETION(cc_recall_timer)=)") in new stack
[2012-09-27 09:45:00] WARNING: ccss.c:916 ast_set_cc_recall_timer: 0 is an invalid value for ccnr_available_timer. Retaining value as 20
-- Executing [agent_config@sub-ccss:7] ExecIf("SIP/118-00000039", "1?Set(CALLCOMPLETION(cc_max_agents)=)") in new stack
-- Executing [agent_config@sub-ccss:8] ExecIf("SIP/118-00000039", "0?Set(CALLCOMPLETION(cc_agent_dialstring)=Local/118_1001@from-ccss-)") in new stack
-- Executing [agent_config@sub-ccss:9] Set("SIP/118-00000039", "CALLCOMPLETION(cc_callback_macro)=ccss-default") in new stack
-- Executing [agent_config@sub-ccss:10] Return("SIP/118-00000039", "") in new stack
-- Executing [s@sub-ccss:5] Set("SIP/118-00000039", "DB(AMPUSER/118/ccss/last_number)=1001") in new stack
-- Executing [s@sub-ccss:6] Return("SIP/118-00000039", "") in new stack
-- Executing [s@macro-user-callerid:12] ExecIf("SIP/118-00000039", "0?Set(CHANNEL(language)=)") in new stack
-- Executing [s@macro-user-callerid:13] GotoIf("SIP/118-00000039", "0?continue") in new stack
-- Executing [s@macro-user-callerid:14] Set("SIP/118-00000039", "TTL=64") in new stack
-- Executing [s@macro-user-callerid:15] GotoIf("SIP/118-00000039", "1?continue") in new stack
-- Goto (macro-user-callerid,s,26)
-- Executing [s@macro-user-callerid:26] Set("SIP/118-00000039", "CALLERID(number)=118") in new stack
-- Executing [s@macro-user-callerid:27] Set("SIP/118-00000039", "CALLERID(name)=fgerardo") in new stack
-- Executing [s@macro-user-callerid:28] Set("SIP/118-00000039", "CHANNEL(language)=en") in new stack
-- Executing [s@macro-exten-vm:2] Set("SIP/118-00000039", "RingGroupMethod=none") in new stack
-- Executing [s@macro-exten-vm:3] Set("SIP/118-00000039", "EXTTOCALL=1001") in new stack
-- Executing [s@macro-exten-vm:4] Set("SIP/118-00000039", "PICKUPMARK=1001") in new stack
-- Executing [s@macro-exten-vm:5] Set("SIP/118-00000039", "RT=") in new stack
-- Executing [s@macro-exten-vm:6] Gosub("SIP/118-00000039", "sub-record-check,s,1(exten,1001,)") in new stack
-- Executing [s@sub-record-check:1] GotoIf("SIP/118-00000039", "1?check") in new stack
-- Goto (sub-record-check,s,6)
-- Executing [s@sub-record-check:6] Set("SIP/118-00000039", "MON_FMT=wav") in new stack
-- Executing [s@sub-record-check:7] GotoIf("SIP/118-00000039", "1?next") in new stack
-- Goto (sub-record-check,s,10)
-- Executing [s@sub-record-check:10] ExecIf("SIP/118-00000039", "0?Return()") in new stack
-- Executing [s@sub-record-check:11] GotoIf("SIP/118-00000039", "0?exten,1") in new stack
-- Executing [s@sub-record-check:12] Set("SIP/118-00000039", "REC_STATUS=INITIALIZED") in new stack
-- Executing [s@sub-record-check:13] ExecIf("SIP/118-00000039", "0?Set(REC_POLICY_MODE=)") in new stack
-- Executing [s@sub-record-check:14] Set("SIP/118-00000039", "NOW=1348757100") in new stack
-- Executing [s@sub-record-check:15] Set("SIP/118-00000039", "DAY=27") in new stack
-- Executing [s@sub-record-check:16] Set("SIP/118-00000039", "MONTH=09") in new stack
-- Executing [s@sub-record-check:17] Set("SIP/118-00000039", "YEAR=2012") in new stack
-- Executing [s@sub-record-check:18] Set("SIP/118-00000039", "TIMESTR=20120927-094500") in new stack
-- Executing [s@sub-record-check:19] Set("SIP/118-00000039", "FROMEXTEN=118") in new stack
-- Executing [s@sub-record-check:20] Set("SIP/118-00000039", "CALLFILENAME=exten-1001-118-20120927-094500-1348757100.57") in new stack
-- Executing [s@sub-record-check:21] Goto("SIP/118-00000039", "exten,1") in new stack
-- Goto (sub-record-check,exten,1)
-- Executing [exten@sub-record-check:1] GotoIf("SIP/118-00000039", "0?callee") in new stack
-- Executing [exten@sub-record-check:2] Set("SIP/118-00000039", "REC_POLICY_MODE=dontcare") in new stack
-- Executing [exten@sub-record-check:3] GotoIf("SIP/118-00000039", "1?caller") in new stack
-- Goto (sub-record-check,exten,10)
-- Executing [exten@sub-record-check:10] Set("SIP/118-00000039", "REC_POLICY_MODE=dontcare") in new stack
-- Executing [exten@sub-record-check:11] GosubIf("SIP/118-00000039", "0?record,1(exten,1001,118)") in new stack
-- Executing [exten@sub-record-check:12] Return("SIP/118-00000039", "") in new stack
-- Executing [s@macro-exten-vm:7] GotoIf("SIP/118-00000039", "1?macrodial") in new stack
-- Goto (macro-exten-vm,s,13)
-- Executing [s@macro-exten-vm:13] GosubIf("SIP/118-00000039", "0?clrheader,1()") in new stack
-- Executing [s@macro-exten-vm:14] Macro("SIP/118-00000039", "dial-one,,tr,1001") in new stack
-- Executing [s@macro-dial-one:1] Set("SIP/118-00000039", "DEXTEN=1001") in new stack
-- Executing [s@macro-dial-one:2] Set("SIP/118-00000039", "DIALSTATUS_CW=") in new stack
-- Executing [s@macro-dial-one:3] GosubIf("SIP/118-00000039", "0?screen,1()") in new stack
-- Executing [s@macro-dial-one:4] GosubIf("SIP/118-00000039", "0?cf,1()") in new stack
-- Executing [s@macro-dial-one:5] GotoIf("SIP/118-00000039", "1?skip1") in new stack
-- Goto (macro-dial-one,s,8)
-- Executing [s@macro-dial-one:8] GotoIf("SIP/118-00000039", "0?nodial") in new stack
-- Executing [s@macro-dial-one:9] GotoIf("SIP/118-00000039", "0?continue") in new stack
-- Executing [s@macro-dial-one:10] Set("SIP/118-00000039", "EXTHASCW=ENABLED") in new stack
-- Executing [s@macro-dial-one:11] GotoIf("SIP/118-00000039", "0?next1:cwinusebusy") in new stack
-- Goto (macro-dial-one,s,23)
-- Executing [s@macro-dial-one:23] GotoIf("SIP/118-00000039", "1?next3:continue") in new stack
-- Goto (macro-dial-one,s,24)
-- Executing [s@macro-dial-one:24] ExecIf("SIP/118-00000039", "0?Set(DIALSTATUS_CW=BUSY)") in new stack
-- Executing [s@macro-dial-one:25] GotoIf("SIP/118-00000039", "0?nodial") in new stack
-- Executing [s@macro-dial-one:26] GosubIf("SIP/118-00000039", "1?dstring,1():dlocal,1()") in new stack
-- Executing [dstring@macro-dial-one:1] Set("SIP/118-00000039", "DSTRING=") in new stack
-- Executing [dstring@macro-dial-one:2] Set("SIP/118-00000039", "DEVICES=1001") in new stack
-- Executing [dstring@macro-dial-one:3] ExecIf("SIP/118-00000039", "0?Return()") in new stack
-- Executing [dstring@macro-dial-one:4] ExecIf("SIP/118-00000039", "0?Set(DEVICES=001)") in new stack
-- Executing [dstring@macro-dial-one:5] Set("SIP/118-00000039", "LOOPCNT=1") in new stack
-- Executing [dstring@macro-dial-one:6] Set("SIP/118-00000039", "ITER=1") in new stack
-- Executing [dstring@macro-dial-one:7] Set("SIP/118-00000039", "THISDIAL=SIP/1001") in new stack
-- Executing [dstring@macro-dial-one:8] GosubIf("SIP/118-00000039", "1?zap2dahdi,1()") in new stack
-- Executing [zap2dahdi@macro-dial-one:1] ExecIf("SIP/118-00000039", "0?Return()") in new stack
-- Executing [zap2dahdi@macro-dial-one:2] Set("SIP/118-00000039", "NEWDIAL=") in new stack
-- Executing [zap2dahdi@macro-dial-one:3] Set("SIP/118-00000039", "LOOPCNT2=1") in new stack
-- Executing [zap2dahdi@macro-dial-one:4] Set("SIP/118-00000039", "ITER2=1") in new stack
-- Executing [zap2dahdi@macro-dial-one:5] Set("SIP/118-00000039", "THISPART2=SIP/1001") in new stack
-- Executing [zap2dahdi@macro-dial-one:6] ExecIf("SIP/118-00000039", "0?Set(THISPART2=DAHDI/1001)") in new stack
-- Executing [zap2dahdi@macro-dial-one:7] Set("SIP/118-00000039", "NEWDIAL=SIP/1001&") in new stack
-- Executing [zap2dahdi@macro-dial-one:8] Set("SIP/118-00000039", "ITER2=2") in new stack
-- Executing [zap2dahdi@macro-dial-one:9] GotoIf("SIP/118-00000039", "0?begin2") in new stack
-- Executing [zap2dahdi@macro-dial-one:10] Set("SIP/118-00000039", "THISDIAL=SIP/1001") in new stack
-- Executing [zap2dahdi@macro-dial-one:11] Return("SIP/118-00000039", "") in new stack
-- Executing [dstring@macro-dial-one:9] Set("SIP/118-00000039", "DSTRING=SIP/1001&") in new stack
-- Executing [dstring@macro-dial-one:10] Set("SIP/118-00000039", "ITER=2") in new stack
-- Executing [dstring@macro-dial-one:11] GotoIf("SIP/118-00000039", "0?begin") in new stack
-- Executing [dstring@macro-dial-one:12] Set("SIP/118-00000039", "DSTRING=SIP/1001") in new stack
-- Executing [dstring@macro-dial-one:13] Return("SIP/118-00000039", "") in new stack
-- Executing [s@macro-dial-one:27] GotoIf("SIP/118-00000039", "0?nodial") in new stack
-- Executing [s@macro-dial-one:28] GotoIf("SIP/118-00000039", "0?skiptrace") in new stack
-- Executing [s@macro-dial-one:29] GosubIf("SIP/118-00000039", "1?ctset,1():ctclear,1()") in new stack
-- Executing [ctset@macro-dial-one:1] Set("SIP/118-00000039", "DB(CALLTRACE/1001)=118") in new stack
-- Executing [ctset@macro-dial-one:2] Return("SIP/118-00000039", "") in new stack
-- Executing [s@macro-dial-one:30] Set("SIP/118-00000039", "D_OPTIONS=tr") in new stack
-- Executing [s@macro-dial-one:31] ExecIf("SIP/118-00000039", "0?SIPAddHeader(Alert-Info: )") in new stack
-- Executing [s@macro-dial-one:32] ExecIf("SIP/118-00000039", "0?SIPAddHeader()") in new stack
-- Executing [s@macro-dial-one:33] ExecIf("SIP/118-00000039", "0?Set(CHANNEL(musicclass)=)") in new stack
-- Executing [s@macro-dial-one:34] GosubIf("SIP/118-00000039", "0?qwait,1()") in new stack
-- Executing [s@macro-dial-one:35] Set("SIP/118-00000039", "CWIGNORE=") in new stack
-- Executing [s@macro-dial-one:36] Set("SIP/118-00000039", "KEEPCID=TRUE") in new stack
-- Executing [s@macro-dial-one:37] GotoIf("SIP/118-00000039", "0?usegoto,1") in new stack
-- Executing [s@macro-dial-one:38] GotoIf("SIP/118-00000039", "0?godial") in new stack
-- Executing [s@macro-dial-one:39] Set("SIP/118-00000039", "CONNECTEDLINE(name,i)=mbve") in new stack
-- Executing [s@macro-dial-one:40] Set("SIP/118-00000039", "CONNECTEDLINE(num)=1001") in new stack
-- Executing [s@macro-dial-one:41] Set("SIP/118-00000039", "D_OPTIONS=trI") in new stack
-- Executing [s@macro-dial-one:42] Dial("SIP/118-00000039", "SIP/1001,,trI") in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Called SIP/1001
-- Connected line update to SIP/118-00000039 prevented.
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [s@macro-dial-one:43] ExecIf("SIP/118-00000039", "0?Set(DIALSTATUS=)") in new stack
-- Executing [s@macro-dial-one:44] GosubIf("SIP/118-00000039", "0?s-CHANUNAVAIL,1()") in new stack
-- Executing [s@macro-dial-one:45] MacroExit("SIP/118-00000039", "") in new stack
-- Executing [s@macro-exten-vm:15] Set("SIP/118-00000039", "SV_DIALSTATUS=CHANUNAVAIL") in new stack
-- Executing [s@macro-exten-vm:16] GosubIf("SIP/118-00000039", "0?docfu,1()") in new stack
-- Executing [s@macro-exten-vm:17] GosubIf("SIP/118-00000039", "0?docfb,1()") in new stack
-- Executing [s@macro-exten-vm:18] Set("SIP/118-00000039", "DIALSTATUS=CHANUNAVAIL") in new stack
-- Executing [s@macro-exten-vm:19] ExecIf("SIP/118-00000039", "0?MacroExit()") in new stack
-- Executing [s@macro-exten-vm:20] GotoIf("SIP/118-00000039", "1?s-CHANUNAVAIL,1") in new stack
-- Goto (macro-exten-vm,s-CHANUNAVAIL,1)
-- Executing [s-CHANUNAVAIL@macro-exten-vm:1] GotoIf("SIP/118-00000039", "0?exit,1") in new stack
-- Executing [s-CHANUNAVAIL@macro-exten-vm:2] PlayTones("SIP/118-00000039", "congestion") in new stack
-- Executing [s-CHANUNAVAIL@macro-exten-vm:3] Congestion("SIP/118-00000039", "10") in new stack
== Spawn extension (macro-exten-vm, s-CHANUNAVAIL, 3) exited non-zero on 'SIP/118-00000039' in macro 'exten-vm'
== Spawn extension (from-internal, 1001, 2) exited non-zero on 'SIP/118-00000039'
-- Executing [h@from-internal:1] Hangup("SIP/118-00000039", "") in new stack
== Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/118-00000039'

Cabe mencionar que estoy probando con un freepbx, pero en otras pruebas que hice con asterisk puro obtuve el mismo resulta, y esta prueba es en freepbx, pensando que algo hice mal en asterisk y para comparar configuraciones, con esta solo logre tener mejor audio en otra extensión que menciono que tengo con un ATA.

Muchas gracias por la ayuda.

Fernando

Re: Configurar asterisk con cisco 2801

Alguien que pueda ayudarme, aun no puedo resolverlo... gracias

chitopunk

Re: Configurar asterisk con cisco 2801

Está algo confuso tu mensaje, pero tu asterisk te arroja..

== Everyone is busy/congested at this time (1:0/0/1)

Eso significa que no está autenticado en algún lado o no lo puede detectar

Estas extensiones en donde están configuradas? en asterisk ?
1001/1001 187.173.95.230 D A 5060 OK (53 ms)
118/118 192.168.10.118 D A 5060 OK (11 ms)
2243/2243 192.168.10.200 D N A 5060 OK (23 ms)

Saludos