Cursos Asterisk en México

Problemas de señalización con enlace Telmex E1-R2 a 10 canales

Colapsar

Anuncio

Colapsar
No hay anuncio todavía.
X
 
  • Filtrar
  • Tiempo
  • Mostrar
Limpiar Todo
nuevos mensajes

  • Problemas de señalización con enlace Telmex E1-R2 a 10 canales

    Buen día tengan todos , solicito su asesoría y/o apoyo con un detalle que se me presento con la señalización con un enlace de un E1 a 10 Canales con el proveedor Telmex, tengo un una tarjeta TE110P la cual la tengo configurada de la siguiente manera :

    > system.conf
    # Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" (MASTER)
    span=1,1,0,cas,hdb3
    echocanceller=oslec,1-10
    cas=1-10:1101
    dchan=16
    # Global data

    loadzone =mx
    defaultzone =mx

    > dahdi-channels.conf ;
    Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" (MASTER)
    group=0
    context=from-pstn
    switchtype = euroisdn
    signalling = mfcr2
    channel => 1-10
    mfcr2_variant=mx
    mfcr2_get_ani_first=no
    mfcr2_max_ani=10
    mfcr2_max_dnis=7
    mfcr2_category=national_subscriber
    mfcr2_mfback_timeout=-1
    mfcr2_metering_pulse_timeout=-1
    pridialplan=unknown
    mfcr2_call_files=yes
    mfcr2_logdir=span1
    mfcr2_logging=all
    channel => 1-10

    > chan_dahdi.conf

    [channels]
    ontext=from-pstn
    signalling=mfcr2
    rxwink=300 ; Atlas seems to use long (250ms) winks
    usecallerid=yes
    hidecallerid=no
    callwaiting=yes
    usecallingpres=yes
    callwaitingcallerid=yes
    threewaycalling=yes
    transfer=yes
    canpark=yes
    cancallforward=yes
    callreturn=yes
    echocancel=yes
    echocancelwhenbridged=no
    faxdetect=incoming
    echotraining=800
    rxgain=0.0
    txgain=0.0
    callgroup=1
    pickupgroup=1
    group=0
    mfcr2_variant=mx
    mfcr2_get_ani_first=no
    mfcr2_max_ani=10
    mfcr2_max_dnis=4
    mfcr2_category=national_subscriber
    mfcr2_call_files=yes
    mfcr2_logdir=span1
    mfcr2_logging=all
    mfcr2_mfback_timeout=-1
    mfcr2_metering_pulse_timeout=-1
    channel => 1-10

    En el whatson de Telmex se encuentra sin alarmas con indicador verde al igual que la tarjeta del pbx no marca error , solo en el pbx me marca que el canal 16 no lo detecta los canales del 1 al 10 me marca en servicio. No encuentro donde este el problema de mi configuración .

    Los logs me arrogan este error

    [2020-08-13 14:42:48] WARNING[3209]: chan_dahdi.c:4581 dahdi_r2_write_log: Chan 1 - MF back cycle timed out! [2020-08-13 14:42:48] ERROR[3209]: chan_dahdi.c:4584 dahdi_r2_write_log: Chan 1 - Protocol error. Reason = Multi Frequency Cycle Timeout, R2 State = Seize ACK Transmitted, MF state = Category Request Transmitted, MF Group = Backward Group C, CAS = 0x00 DNIS = 8, ANI = , MF = 0x38 [2020-08-13 14:42:48] ERROR[3209]: chan_dahdi.c:4344 dahdi_r2_on_protocol_error: MFC/R2 protocol error on chan 1: Multi Frequency Cycle Timeout [2020-08-13 14:42:49] NOTICE[3256]: chan_sip.c:23787 handle_response_peerpoke: Peer '45920' is now Reachable. (4ms / 2000ms) [2020-08-13 14:43:08] ERROR[4575][C-00000001]: chan_dahdi.c:4584 dahdi_r2_write_log: Chan 1 - Trying to dial out in a non-idle channel (cas=0x00) [2020-08-13 14:43:08] ERROR[4575][C-00000001]: chan_dahdi.c:5944 dahdi_call: unable to make new MFC/R2 call! [ [2020-08-13 14:43:12] WARNING[4575][C-00000001]: channel.c:4862 ast_prod: Prodding channel 'SIP/45920-00000002' failed [2020-08-13 14:46:22] ERROR[3213]: chan_dahdi.c:4584 dahdi_r2_write_log: Chan 5 - Protocol error. Reason = Multi Frequency Cycle Timeout, R2 State = Seize ACK Transmitted, MF state = Category Request Transmitted, MF Group = Backward Group C, CAS = 0x00 DNIS = 8, ANI = , MF = 0x38 [2020-08-13 14:46:22] ERROR[3213]: chan_dahdi.c:4344 dahdi_r2_on_protocol_error: MFC/R2 protocol error on chan 5: Multi Frequency Cycle Timeout New MFC/R2 call detected on chan 6. New MFC/R2 call detected on chan 1. [2020-08-13 14:52:47] WARNING[3209]: chan_dahdi.c:4581 dahdi_r2_write_log: Chan 1 - MF back cycle timed out! [2020-08-13 14:52:47] ERROR[3209]: chan_dahdi.c:4584 dahdi_r2_write_log: Chan 1 - Protocol error. Reason = Multi Frequency Cycle Timeout, R2 State = Seize ACK Transmitted, MF state = Category Request Transmitted, MF Group = Backward Group C, CAS = 0x00 DNIS = 8, ANI = , MF = 0x38 [2020-08-13 14:52:47] ERROR[3209]: chan_dahdi.c:4344 dahdi_r2_on_protocol_error: MFC/R2 protocol error on chan 1: Multi Frequency Cycle Timeout [2020-08-13 14:52:51] ERROR[4982][C-00000002]: chan_dahdi.c:4584 dahdi_r2_write_log: Chan 1 - Trying to dial out in a non-idle channel (cas=0x00) [2020-08-13 14:52:51] ERROR[4982][C-00000002]: chan_dahdi.c:5944 dahdi_call: unable to make new MFC/R2 call! [2020-08-13 14:52:55] WARNING[4982][C-00000002]: channel.c:4862 ast_prod: Prodding channel 'SIP/45920-00000003' failed


    *** Espero y me puedan ayudar. Se los agradecería mucho ***

    Saludos a todos
    You do not have permission to view this gallery.
    This gallery has 1 photos.

Principales Usuarios Activos

Colapsar

No hay usuarios activos superiores.
Trabajando...
X