Actualizar modulos de FreePBX por consola

Elio

Hola,

He realizado la sincronizacion entre dos Centrales con FreePBX 13 (Una Master y la otra Slave), al realizar la sincronizacion entre la base de datos y a nivel web (GUI) todo marcha bien, el inconveniente que tengo es que al realizar las llamadas desde la PBX Slave todas las extensiones se escuchan ocupada.

Para solucionar esto me he dado cuento que tengo que hacer algún cambio en FreePBX por la interfaz web para que funcionen las extensiones.

La pregunta que tengo es si alguien sabe como ejecutar el boton de "Submit" y el boton "Apply Config" que aparece en al hacer cambio en FreePBX por consola ?

Saludos.

Christian_Cabrera

Son 2 comandos:

Para regenerar la configuración:
/var/lib/asterisk/bin/retrieve_conf

Para decirle a Asterisk que recargue todo:
/usr/sbin/asterisk -rx "module reload"

Elio

Hola Christian,

Gracias por la informacion, al aplicar los comando que me indicas solo puedo llamar desde una extensión hacia otra (8008 --> 8009) pero viceversa no. Favor de verificar que estoy haciendo mal.

Este es el verb que me arroja
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
> 0x1a52fe0 -- Strict RTP learning after remote address set to: 192.168.88.249:5004
-- Executing [8009@from-internal:1] GotoIf("SIP/8008-00000010", "1?ext-local,8009,1:followme-check,8009,1") in new stack
-- Goto (ext-local,8009,1)
-- Executing [8009@ext-local:1] Set("SIP/8008-00000010", "RINGTIMER=15") in new stack
-- Executing [8009@ext-local:2] Macro("SIP/8008-00000010", "exten-vm,novm,8009,0,0,0") in new stack
-- Executing [s@macro-exten-vm:1] Macro("SIP/8008-00000010", "user-callerid,") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/8008-00000010", "TOUCH_MONITOR=1517343630.16") in new stack
-- Executing [s@macro-user-callerid:2] Set("SIP/8008-00000010", "AMPUSER=8008") in new stack
-- Executing [s@macro-user-callerid:3] GotoIf("SIP/8008-00000010", "0?report") in new stack
-- Executing [s@macro-user-callerid:4] ExecIf("SIP/8008-00000010", "1?Set(REALCALLERIDNUM=8008)") in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/8008-00000010", "AMPUSER=8008") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("SIP/8008-00000010", "0?limit") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/8008-00000010", "AMPUSERCIDNAME=8008") in new stack
-- Executing [s@macro-user-callerid:8] GotoIf("SIP/8008-00000010", "0?report") in new stack
-- Executing [s@macro-user-callerid:9] Set("SIP/8008-00000010", "AMPUSERCID=8008") in new stack
-- Executing [s@macro-user-callerid:10] Set("SIP/8008-00000010", "DIAL_OPTIONS=Ttr") in new stack
-- Executing [s@macro-user-callerid:11] Set("SIP/8008-00000010", "CALLERID(all)="8008" <8008>") in new stack
-- Executing [s@macro-user-callerid:12] GotoIf("SIP/8008-00000010", "0?limit") in new stack
-- Executing [s@macro-user-callerid:13] ExecIf("SIP/8008-00000010", "0?Set(GROUP(concurrency_limit)=8008)") in new stack
-- Executing [s@macro-user-callerid:14] NoOp("SIP/8008-00000010", "Macro Depth is 2") in new stack
-- Executing [s@macro-user-callerid:15] GotoIf("SIP/8008-00000010", "1?report2:macroerror") in new stack
-- Goto (macro-user-callerid,s,16)
-- Executing [s@macro-user-callerid:16] GotoIf("SIP/8008-00000010", "0?continue") in new stack
-- Executing [s@macro-user-callerid:17] Set("SIP/8008-00000010", "TTL=64") in new stack
-- Executing [s@macro-user-callerid:18] GotoIf("SIP/8008-00000010", "1?continue") in new stack
-- Goto (macro-user-callerid,s,34)
-- Executing [s@macro-user-callerid:34] Set("SIP/8008-00000010", "CALLERID(number)=8008") in new stack
-- Executing [s@macro-user-callerid:35] Set("SIP/8008-00000010", "CALLERID(name)=8008") in new stack
-- Executing [s@macro-user-callerid:36] GotoIf("SIP/8008-00000010", "0?cnum") in new stack
-- Executing [s@macro-user-callerid:37] Set("SIP/8008-00000010", "CDR(cnam)=8008") in new stack
-- Executing [s@macro-user-callerid:38] Set("SIP/8008-00000010", "CDR(cnum)=8008") in new stack
-- Executing [s@macro-user-callerid:39] Set("SIP/8008-00000010", "CHANNEL(language)=en") in new stack
-- Executing [s@macro-exten-vm:2] Set("SIP/8008-00000010", "RingGroupMethod=none") in new stack
-- Executing [s@macro-exten-vm:3] Set("SIP/8008-00000010", "EXTTOCALL=8009") in new stack
-- Executing [s@macro-exten-vm:4] Set("SIP/8008-00000010", "PICKUPMARK=8009") in new stack
-- Executing [s@macro-exten-vm:5] Set("SIP/8008-00000010", "RT=") in new stack
-- Executing [s@macro-exten-vm:6] Gosub("SIP/8008-00000010", "sub-record-check,s,1(exten,8009,dontcare)") in new stack
-- Executing [s@sub-record-check:1] GotoIf("SIP/8008-00000010", "0?initialized") in new stack
-- Executing [s@sub-record-check:2] Set("SIP/8008-00000010", "REC_STATUS=INITIALIZED") in new stack
-- Executing [s@sub-record-check:3] Set("SIP/8008-00000010", "NOW=1517343630") in new stack
-- Executing [s@sub-record-check:4] Set("SIP/8008-00000010", "DAY=30") in new stack
-- Executing [s@sub-record-check:5] Set("SIP/8008-00000010", "MONTH=01") in new stack
-- Executing [s@sub-record-check:6] Set("SIP/8008-00000010", "YEAR=2018") in new stack
-- Executing [s@sub-record-check:7] Set("SIP/8008-00000010", "TIMESTR=20180130-162030") in new stack
-- Executing [s@sub-record-check:8] Set("SIP/8008-00000010", "FROMEXTEN=8008") in new stack
-- Executing [s@sub-record-check:9] Set("SIP/8008-00000010", "MON_FMT=wav") in new stack
-- Executing [s@sub-record-check:10] NoOp("SIP/8008-00000010", "Recordings initialized") in new stack
-- Executing [s@sub-record-check:11] ExecIf("SIP/8008-00000010", "0?Set(ARG3=dontcare)") in new stack
-- Executing [s@sub-record-check:12] Set("SIP/8008-00000010", "REC_POLICY_MODE_SAVE=") in new stack
-- Executing [s@sub-record-check:13] ExecIf("SIP/8008-00000010", "0?Set(REC_STATUS=NO)") in new stack
-- Executing [s@sub-record-check:14] GotoIf("SIP/8008-00000010", "5?checkaction") in new stack
-- Goto (sub-record-check,s,17)
-- Executing [s@sub-record-check:17] GotoIf("SIP/8008-00000010", "1?sub-record-check,exten,1") in new stack
-- Goto (sub-record-check,exten,1)
-- Executing [exten@sub-record-check:1] NoOp("SIP/8008-00000010", "Exten Recording Check between 8008 and 8009") in new stack
-- Executing [exten@sub-record-check:2] Set("SIP/8008-00000010", "CALLTYPE=internal") in new stack
-- Executing [exten@sub-record-check:3] ExecIf("SIP/8008-00000010", "0?Set(CALLTYPE=)") in new stack
-- Executing [exten@sub-record-check:4] Set("SIP/8008-00000010", "CALLEE=") in new stack
-- Executing [exten@sub-record-check:5] ExecIf("SIP/8008-00000010", "1?Set(CALLEE=dontcare)") in new stack
-- Executing [exten@sub-record-check:6] GotoIf("SIP/8008-00000010", "0?callee") in new stack
-- Executing [exten@sub-record-check:7] GotoIf("SIP/8008-00000010", "1?caller") in new stack
-- Goto (sub-record-check,exten,13)
-- Executing [exten@sub-record-check:13] Set("SIP/8008-00000010", "RECMODE=dontcare") in new stack
-- Executing [exten@sub-record-check:14] ExecIf("SIP/8008-00000010", "0?Set(RECMODE=dontcare)") in new stack
-- Executing [exten@sub-record-check:15] ExecIf("SIP/8008-00000010", "1?Set(RECMODE=dontcare)") in new stack
-- Executing [exten@sub-record-check:16] Gosub("SIP/8008-00000010", "recordcheck,1(dontcare,internal,8009)") in new stack
-- Executing [recordcheck@sub-record-check:1] NoOp("SIP/8008-00000010", "Starting recording check against dontcare") in new stack
-- Executing [recordcheck@sub-record-check:2] Goto("SIP/8008-00000010", "dontcare") in new stack
-- Goto (sub-record-check,recordcheck,3)
-- Executing [recordcheck@sub-record-check:3] Return("SIP/8008-00000010", "") in new stack
-- Executing [exten@sub-record-check:17] Return("SIP/8008-00000010", "") in new stack
-- Executing [s@macro-exten-vm:7] GotoIf("SIP/8008-00000010", "1?macrodial") in new stack
-- Goto (macro-exten-vm,s,13)
-- Executing [s@macro-exten-vm:13] GosubIf("SIP/8008-00000010", "0?clrheader,1()") in new stack
-- Executing [s@macro-exten-vm:14] Macro("SIP/8008-00000010", "dial-one,,Ttr,8009") in new stack
-- Executing [s@macro-dial-one:1] Set("SIP/8008-00000010", "DEXTEN=8009") in new stack
-- Executing [s@macro-dial-one:2] ExecIf("SIP/8008-00000010", "0?Set(EXTTOCALL=8009)") in new stack
-- Executing [s@macro-dial-one:3] Set("SIP/8008-00000010", "DIALSTATUS_CW=") in new stack
-- Executing [s@macro-dial-one:4] GosubIf("SIP/8008-00000010", "0?screen,1()") in new stack
-- Executing [s@macro-dial-one:5] GosubIf("SIP/8008-00000010", "0?cf,1()") in new stack
-- Executing [s@macro-dial-one:6] GotoIf("SIP/8008-00000010", "1?skip1") in new stack
-- Goto (macro-dial-one,s,9)
-- Executing [s@macro-dial-one:9] GotoIf("SIP/8008-00000010", "0?nodial") in new stack
-- Executing [s@macro-dial-one:10] GotoIf("SIP/8008-00000010", "0?continue") in new stack
-- Executing [s@macro-dial-one:11] Set("SIP/8008-00000010", "EXTHASCW=") in new stack
-- Executing [s@macro-dial-one:12] GotoIf("SIP/8008-00000010", "1?next1:cwinusebusy") in new stack
-- Goto (macro-dial-one,s,13)
-- Executing [s@macro-dial-one:13] GotoIf("SIP/8008-00000010", "0?docfu:skip3") in new stack
-- Goto (macro-dial-one,s,17)

Elio

Christian, se me olvidaba paserte el archivo con el verbo completo aqui esta.

Gracias.

verb.txt

Elio

(contenido vacío o no migrable)

Christian_Cabrera

Al parecer no quedó bien subido el archivo. Súbelo a pastebin.org y pasa la liga para poder observarlo. Recuerda separar entre los intentos de llamada que funcionan y los que no para tener una mejor apreciación.

Elio

https://www.dropbox.com/s/lzvpn0x5wigl3yb/cAvqg173.txt?dl=0

Elio

Christian, le envio el link por dropbox

Christian_Cabrera

En el archivo que compartiste no se ve siquiera el intento de la 8009 --> 8008, que es la que no te funciona.